Load Cell 3 mV/V Panel Meter with 2 Relays, Analog Output, RS-485 24VDC
5 Digit Panel Meter for 3 mV/V Load Cells. 20 mm tall LED digits. 2 relays for alarms. 4 to 20 mA output and RS-485 for system integration. 24VDC powered.
This economical 5 digit indicator suits load cells with 3 mV/V output. It provides 10 V excitation for 4-wire load cells. Two 7 A, SPDT relays can be set as alarms when the value exceeds or falls below alarm trip points. A 15-bit 4 to 20 mA analog output allows the meter to act as a load cell signal conditioner. An RS-485 connection allows a PLC or PC speaking Modbus RTU to poll the meter and read the current display value or change configuration settings. Connections at the rear of the unit activate zero (tare), maximum and display hold functions.
Features:
- 5 digit, High brightness 20 mm tall LED display
- Zero (tare), maximum hold and data hold
- High stability, non-flammable case (PC), high safety
Power supply: DC22~50V
Power Consumption: 8.5VA (all functions output)
Accuracy: ±0.1% full scale or ±1 digit accuracy
Display screen: High brightness red LED - 20.3mm (0.8")
Display range: -19999 to 99999
Zero adjustment: -19999 to 99999
Analog output resolution: 16 bit
Output capability:
- Voltage output: ≤ 20mA
- Current output: ≤ 10V
Output response time: ≤ 250 msec (0 to 90%)
Communication: RS-485 Modbus RTU mode
Baud rate: 19200 / 9600 / 4800 / 2400 bps
Parameters setting: push buttons
Back up memory: EEPROM
Temperature coefficient: 100ppm/°C (0 to 60 °C)
Operating temperature: 0 to 60°C
Operating humidity: 20 to 90% RH (non-condensing)
Storage temperature: -10 to 70 °C
Storage humidity: 20 to 90% RH (non-condensing)
Panel cutout: 92 × 45 mm
The manual lists many options in the MA5H-A series, some of which Ocean Controls carries. Contact us for availability, pricing and lead time on configurations not listed on the website.
Dispatch
In-stock orders are dispatched within 2 business days.
Shipping options
We deliver across Australia and internationally by any of the following methods:
- Australia Post Express
- Australia Post Parcel Post
- DHL
- FedEx (only international)
- Freight account. We'll email packaging dimensions when the shipment is ready to be book.
*Transit times vary depending on the shipping method and destination.
Store Pickup - Carrum Downs, Victoria, 3201
Order before 11am to collect after 2pm the same day. Mon–Fri, 9am–5pm, excludes public holidays.
RETURNS
How to return an item Contact us before sending anything back. Email info@oceancontrols.com.au or call +61 3 9708 2390. We'll confirm eligibility and guide you to the return process.
Return window 14 days from dispatch date.
Condition required Items must be unused and in original packaging, including all documentation and manuals.
Restocking fee A 20% restocking fee applies to all accepted returns. Return shipping costs are the customer's responsibility.
Non-returnable items
- Custom-made or specially imported products
- Software licences (some software have trial versions available)
- Items not in original, as-new condition
WARRANTY
How to make a warranty claim Before returning anything, please contact us. Our engineers can often resolve the issue remotely. If a return is required, our team will provide you with a warranty form to include with the goods.
What's covered Defects in materials and workmanship under normal use and correct installation.
What's not covered The warranty does not cover damage or failures caused by factors outside our control, including incorrect installation, unauthorised alterations or modifications, or any installation or use not recommended by the manufacturer.
Standard warranty All products carry a 12-month warranty from the date of purchase unless stated otherwise.
Extended warranty
- Labjack: 5 Years
- Atop: 5 Years
- MeanWell: 3 Years
- Teracom: 3 Years
- Novus: 3 Years
