N480D T/C, RAR 2 Relays+4-20mA Pwr: 24VDC

N480D T/C, RAR 2 Relays+4-20mA Pwr: 24VDC

SKU: CET-054

N480D T/C, RAR 2 Relays+4-20 mA Pwr: 24 VDC. USB port for configuration

Novus
  • Manufacturer: Novus
Buy more for less:
1-4items$142.67/ each 
5-9items$128.41/ eachsave10%
10or more items$121.28/ eachsave15%
  • $142.67
Qty:  
In stock(3 items available)

The N480D series of PID temperature controllers was designed for non-experienced novice users for combining extreme simplicity in operation with high performance only found in expensive high end controllers. It is a low-cost instrument which can be easily installed and operated. It accepts J,K and S thermocouples and Pt100 RTD, features a relay and pulse output for driving solid state relays and optionally can be supplied with a linear 4 to 20 mA output. Auto-tuning PID function, dual display, full range universal power supply and ramps soak function are standard. It greatly surpasses the old and obsolete analog controllers in performance with ease of operation.

Fitted with a USB port it can be easily configured and monitored using QuickTune Software including PID and ramp and soak parameters

QuickTune Software:

This controller can be configured and monitored using the QuickTune software

Power supply: 100 to 240 VAC/DC, 50/60 Hz (optional 24 VDC/AC)

Power consumption: 6 VA

Internal resolution: 15 bits

Display: 

  • Four-digit 10mm red display for measured variable
  • Four-digit 7mm green display for set point

Display resolution: -1999 to 9999

Input reading rate: Up to 55 per second

Accepts thermocouples type (With cold junction compensation):

  • J range -50 ºC to 760 ºC
  • K range -90 ºC to 1370 ºC
  • T range -100 ºC to 400 ºC
  • R range 0 to 1760 ºC
  • S from 0 to 1760 ºC
  • E range -30 a 720 ºC
  • N range -90 a 1300 ºC

 Pt100 RTD: Accepts 2 or 3-wire of range -200 to 530 ºC, with cable resistance compensation

Precision: 

  • Thermocouples J,K,T,E: 0.25% of the span ±1°C
  • Thermocouples N,R,S,B: 0.25% of the span ±3°C
  • Pt100: 0.2% of the span

Input impedance: >10 MΩ 

Outputs:

  • Output A / Output C: 
    • Relay SPST-NA: 1.5 A / 240 VAC
    • General use, resistive load: 100k cycles
  • Output B: 
    • Voltage pulse for SSR, 12 V max. / 20 mA
  • Output (RPR / RRR):
    • Relay SPDT: 3A / 250 VAC, general use
  • Output (RAR): 
    • 0 to 20 mA or 4 to 20 mA, 550 Ω max. 31000 levels, Isolated 

USB interface: 2.0, CDC class (virtual communications port), MODBUS RTU protocol. 

Operating temperature: 5 to 50 °C 

Relative humidity: 80 % max. up 30 ºC For temperatures above 30 ºC, reduce 3 % for each ºC 

Electromagnetic compatibility:  EN 61326-1:1997 and EN 61326-1/A1:1998 

Front panel: IP65, polycarbonate UL94 V-2 

Back panel: IP30, ABS+PC UL94 V-0.

Cutout panel: 45.5 x 45.5 mm

Weight: Approx.150 g

Dimension: 48 x 48 x 110 mm (1/16 DIN)

    • SKU
      CET-054
    • Weight
      0.2 kg
    • Dimensions (L x W x H)
      12 x 8 x 7 cm

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Customers who viewed this product also bought