PM Temp Controller DIN Rail Mount - SSR Pulse Output
DIN Rail mount Temperature controller, 24 to 36 VDC powered. TC/RTD(PT100) input with 1 SSR drive pulse output and 1 alarm output. RS-485 interface.
This P-series temperature controller is a programmable thermostat controller with Thermocouple and RTD(PT100) sensor input.
The SSR output has independent settings for setpoint, hysteresis, cooling or heating action and on time. Each output can be set to a pulse mode where the relay constantly toggles on and off when the temperature exceeds (or falls below) the setpoint.
The controller has PID and self-tuning function with micro-processing options. Serial communication support RTU and ASCII formats of Modbus. The maximum speed can reach 38400 bit/s.
Please Note: To avoid interference, signal cable and power lines should be kept away from load power conducting wire. If power supply is connected, DO NOT touch the power terminals to prevent electric shock
- Power supply: 90-240 VAC, 24-36 VDC
- Inputs: Thermocouple, RTD, analog voltage/current. Refer to input type list
- Accuracy: ±0.3%
- Power Consumption: 5 VA
- Alarm Output: NPN O.C, 0.1 A@24 VDC
- Logic Voltage (to drive SSRs) Output: ON= 24 V @20 mA max
- Manufacturer Item No: PM0-2101D
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
