Variable Speed Drive 240 VAC, 2.2 kW Single Phase Input

Available for backorder
  • Weight
    2 kg
  • SKU
    DEM-007

Single phase 240 VAC input, three phase output variable speed drive (inverter) with RS-485 Modbus. Suits motors up to 2.2 kW (3.0 HP)

Buy more for less:
Quantity ex GST incl GST Saving
1-4 items $416.78 / each N/A  
5-9 items $375.10 / each N/A save 10%
10 or more items $354.26 / each N/A save 15%
  • $416.78
Qty:  

The drive is packed with features. The output stage uses rugged IGBTs and has selectable carrier frequency with sinusoidal PWM voltage and frequency control. Soft start and configurable linear or S-curve acceleration and decelleration prolongs machine life. Acceleration and deceleration can independently be configured. The drive has an internal chopper and can absorb approximately 20% of the rated torque during regenerative braking but can easily be fitted with an external brake resistor for larger capability. In addition to the standard range of analog and digital inputs, the drive features an RS-485 port and understands Modbus RTU or ASCII commands, allowing integration into larger process systems controlled by a PLC or SCADA system.

  • 0.1 to 600 Hz Output frequency
  • IGBT based sinusoidal PWM control with 3 point adjustable V/f curve
  • Built-in PID feedback control
  • Built-in EMI filter with RFI-switch for IT (isolated) mains
  • Auto-torque / auto-slip compensation
  • 3 skip frequency zones to avoid resonances and potential machine damage
  • S-curve acceleration and deceleration
  • Auto acceleration and deceleration by live sensing of torque
  • Fault record memory
  • Momentary power loss restart
  • Parameter lock and reset
  • RS-485 communication interface (RJ-45) with Modbus protocol
  • Easy DC Bus Sharing for connecting multiple drives in parallel and sharing regenerative braking energy
  • DIN rail mountable side-by-side for easy installation
  • Auxiliary analog outputs
  • Built-in fan for forced cooling
  • Complete range of protection functions
  • Rated Output Capacity: 4.2 kVA
  • Rated Output Current: 11 A
  • Output Frequency: 0.1 to 600 Hz
  • Carrier Frequency: 2 to 12 kHz
  • Rated Input Current: 24 A
  • Rated Input Voltage: 200 to 240 VAC, 50/60 Hz
  • Cooling Method: Built-in Fan
  • Weight: 1.7 kg
  • Control System: Sinusoidal PWM
  • Frequency Setting Resolution: 0.01 Hz
  • Output Frequency Resolution: 0.01 Hz
  • Starting torque: 150% at 5 Hz
  • Accel/Deccl Time: 0.1 to 600 seconds
  • Protocol: RS-485 Modbus ASCII/RTU
  • Protection Functions: Over voltage, over current, under voltage, external fault, overload, ground fault, overheating, electronic thermal, IGBT short circuit, PTC
  • Ingress Protection: IP20
  • Ambient Temperature: -10 to 50 °C, 40 °C for side-by-side mounting
  • Ambient Humidity: ≤90%, non condensing
  • Vibration:1 G <20 Hz, 0.6 G from 20 to 50 Hz
  • Model Number: VFD007EL21A
  • Suits Motors: ≤2.2 kW (≤1.0 HP)

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.