Fema

Large four digit process indicator accepts 4~20mA, 0~10Vdc, ±20mA and ±10Vdc signals with configurable engineering units. 10cm High digits. Alarm relay and 230VAC Powered.

The new I4E signal converters from Fema can be configured to measure voltage signals (AC and DC) with ranges from 0 / 50mV up to 0 / 600V, current signals (AC and DC) from 0 / 5mA up to 0 / 5A, and frequencies from power lines (up to 100Hz). The output is a standard process signal configurable to 4 / 20mA or 0 / 10Vdc and has 4 Digit display. We have a service to configure the I4E for you if you require it.

Large four digit process indicator accepts 4~20mA, 0~10Vdc, ±20mA and ±10Vdc signals with configurable engineering units. 10cm High digits. Alarm relay and 24VDC Powered.

The I3P Signal Isolator accepts process signals (mA and Vdc), thermocouples (K, J, N, E, T, R, S, B), resistive temperature probes (Pt100, Pt500, Pt1000, Ni100, Ni1000, PTC and NTC), resistances and potentiometers. Easy configuration with configuration codes. We have a service to configure the I3P for you if you require it.

Configurable, 96×48 mm in-loop LED display of process variables. Scale and offset setting allow the value to be displayed in appropriate engineering units. IP65 rated product.

Now this product is only sold as the IP65 version

Current loop isolator for 4/20mA and 0/50mA current loop signals, . It is designed for industrial OEM applications. The CCT-100 instrument does not need any type of configuration, and is powered from the input signal loop.

Four digit universal process indicator accepts thermocouples, RTD's, Thermistors, AC voltage and current (600VAC and 5AAC) , DC voltage and current (600VDC and 5ADC) and Frequency. 18 to 265 Vac/dc Powered.

Load cells of 1mV/V, 2mV/V and 3 mV/V, and signal ranges up to 100mV. Provides excitation voltage configurable to +5 Vdc or +10 Vdc (max. 140mA) to power up to 8 standard 350 Ohms cells. Scalable reading from 999999 to -199999 with configurable decimal point.

Four digit universal process indicator accepts thermocouples, RTD's, Thermistors, AC (600VAC and 5AAC) , DC (600VDC and 5ADC) and Frequency. 4 Relays and Analog output. 18 to 265 Vac/dc Powered.

The DRA from Fema Electronica is a metal bracket which allows a 48 x 96 panel meter to be mounted on DIN Rail. It is suitable for use with Fema meters

Fema Electronica's wall mount housing for 96x48mm (1/8 DIN) panel meters.
Full IP65 protection. Connections through cable glands.

Panel meter with 20 mm digit height, in 96 x 48 mm (1/8 DIN) standard size, for panel mount. Can be read 8 meters away. Accepts 4/20 mA, 0/10 Vdc, ±20 mA and ±10 Vdc signals. 85 to 265 Vac/dc Powered.

Large four digit impulse counter, ratemeter and periodmeter functions. Versatile and configurable instrument, accepts all type of impulse signals and encoders. Provides excitation voltage to power-up the sensor. 

Large display,4 digits for temperature Pt100/RTD & thermocouples, 11 to 36Vdc  supply, red colour, 100mm high digits. IP65

The B series Load Cell from Fema can measure load cell signals and is a versatile and configurable instrument. It can provide an excitation voltage of 5Vdc or 10Vdc to power up to 8 standard 350 Ohm load cells. Alarm relay and 230VAC Powered.

The signal converter from FEMA has an input of 4-20mADC current. It can output -10VDC to 10VDC. Galvanic isolation between input, output and power circuits. The unit is powered by 24VDC.

Fema I4L is an isolated signal converter for load cell signals and millivolts. Provides +5 Vdc excitation voltage to power the load cell, and ‘sense’ function to compensate for excitation voltage variations. Accepts direct connection of 1, 2, 3 or up to 4 load cells (typical 350 Ohms load cells). We have a service to configure the I4L for you if you require it.

Fema I4P is an Isolated signal converter for process, temperatures, resistances and potentiometers. Output signal in 4/20mA and 0/10Vdc. Isolated 3 ways. We have a service to configure the I4L for you if you require it.

Newly released the Fema I3D accepts process signals in 4/20 mA and 0/10 Vdc, provides excitation voltage if needed. Dual 4-20mA outputs. Isolated 4 ways between power, input signal, output 1 and output 2.  We have a service to configure the I3D for you if you require it.

Fema I4F is an Isolated signal converter for frequency, impulses, RPM speed, and flow signals. Output signal in 4/20mA and 0/10Vdc. Isolated 3 ways.
Configurable to work with NPN, PNP, Pick-up, Namur, mechanical contact, reed contact, and other sensors. Dedicated input to measure frequency from AC voltage up to 600 Vac.
Accepts a wide range of frequency ranges, from 1 Hertz up to 1 MHertz, with a minimum workable signal of 100 milliHertz and resolution of 1 milliHertz.  

We have a service to configure the I4F for you if you require it.