500 Line 8 mm Internal Hollow Diameter Rotary Encoder with Flex Bracket Flange
500 line rotary encoder with 8 mm internal hollow diameter rotary encoder with flex bracket flange. Power Supply requirement is 12-24 VDC with A, B and Z NPN-style output
500 line rotary encoder with A, B and Z NPN-style outputs. 8 mm diameter shaft with flex bracket flange. It requires 12 to 24 V DC power supply. Low price at high performance, small size, light weight, easy installation.
- 8 mm hollow shaft with flex bracket flange
- Rear Entry Cable
- 500 Line
- Quadrature output with index pulse
- 12 to 24 VDC Power
- NPN style open collector outputs
Quadrature 90° Output phase difference. A leads B clockwise when viewing the encoder shaft end.
The datasheet lists various other configurations which may be available on request. Minimum order quantities may apply and prices may be different.
- Supply voltage: 12 to 24 V DC
- Output wave: Square wave
- Output signals: A, B, Z
- Current consumption: ≤120 mA
- Response frequency: 0 to 100 kHz
- Output phase difference: 90° ± 45°
- Signal level: ≤0.3 V
- Square-wave accuracy: X1+X2=(1/2)T+/-(1/12)T
- X3+X4=(1/2)T+/-(1/12)T
- Pitch error of period: ±0.01T
- Pitch error of phase position: ≤1/18T
- Period of pulses: T = 360°/N (N: Output pulses)
- Signal accuracy: Xn = 1/4T ± 1/12T (n=1, 2, 3, 4)
- Number of pulses: 500
- Output circuit: Open collector NPN,push pull,line driver, voltage
- Speed without sealing: 45,000 RPM
- Rotor moment of inertia: 3.5×10-6 Kg.m2
- Starting torque without sealing: 5.0×10-3 Nm
- Maximum load permitted on shaft: Radial 20 N, Axial 10 N
- Shock resistance: 980 m/s2, 6 ms, 2 times each in X,Y,Z directions
- Vibration resistance: 50 m/s2,10 to 200 Hz, 2 times each in X,Y,Z directions
- Working life (MTBF): ≥25,000 hours (at 25 °C, 2000 RPM)
- Weight: Approx 18 g with 1 m cable
- Output circuit: NPN
- Working humidity: 30 to 85% (Non-condensing)
- Storage temperature: -30 °C to 85 °C
- Working temperature: -10 °C to 70 °C
- Protection class: IP54
- Manufacturer Part: IBEST IHC3808-401G500BZ3-12-24C
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
