ASC5810 Absolute Encoder 10 bit, 10mm Shaft and 5VDC Powered
ASC5810 Absolute Encoder features a 10 bit binary code angular position, 10mm Shaft and 5VDC Powered
The ASC5810 Absolute Encoder outputs a 10 bit binary code which shows the current 0 to 360 degree angular position. The reading can also be used to measure speed of rotation. The SSI interface requires a 0 to 5VDC clock signal (up to 1MHz) to read the 10 bit binary code. The encoder features a 10mm Shaft and is 5VDC Powered
- Absolute rotary encoder, single turn.
- Suitable for automatic measuring and control system for angle and speed.
- Series or Parallel connection.
- Natural code or grey code.
- Single turn zero point reset, non-affected for power OFF or system OFF.
- IP54 ratings,excellent anti-interference, anti-moistureproof?anti-pollution.
- Compact size, light weight and stable reliability.
- Power Supply: DC 5 V or 12 V or 24 V
- Output: NPN open collector or voltage output.
- Outside diameter: 58 mm, 10 mm solid shaft.
- No. of bits or pulses: 8(256), 9(512), 10(1024),12(4096),13(8192) bits.
- Manufacturer Part: ASC5810-0010G-B-5E-S-M-S.
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
