|

LabJack UE9-Pro Data Acquisition Module

In stock (1 item available)
  • Weight
    0.5 kg
  • SKU
    LAJ-015

LabJack UE9-Pro USB/Ethernet IO module with 14 analog inputs (up to 20 bit resolution), 2 analog outputs and 23 digital IO.

Buy more for less:
Quantity ex GST incl GST Saving
1-4 items AUD1245.10 / each AUD1369.61 / each  
5-9 items AUD1120.60 / each AUD1232.66 / each save 10%
10 or more items AUD1058.35 / each AUD1164.19 / each save 15%
  • AUD1245.10 ex GST
  • AUD1369.61 incl GST
Qty:  

A USB/Ethernet based multi function data acquisition and control device. The UE9-Pro has all the features of the normal UE9 with the addition of an auxiliary low-speed hi-resolution (24-bit) sigma-delta ADC. This converter takes about 125 ms per sample and provides an effective resolution of about 20-bits over the 0-5 or +/-5 volt ranges. Linearity and accuracy are also improved compared to the normal converter. Is a USB/Ethernet based multi function data acquisition and control device. It features high data acquisition rates together with a high resolution ADC

Analog Inputs: 

The LabJack UE9 has 14 external analog inputs (AIN0-AIN13). AIN0-AIN3 are available on screw terminals and also on the DB37 connector. All 14 analog inputs are available on the DB37 connector.

Each analog input can be configured individually as unipolar (four ranges from 0-5 volts to 0-0.625 volts) or bipolar (±5 volts). Analog input resolution is 12-bits at max speed (12 us conversion time), increasing up to 16-bits at slower speeds (2.7 ms conversion time).

Command/response (software timed) analog input reads typically take 1.2+ ms depending on number of channels and communication configuration. Hardware timed input streaming has a maximum rate that varies with resolution from 250 samples/s at 16-bits to 50+ k samples/s at 12-bits.

The UE9-Pro has all the features of the normal UE9 with the addition of an auxiliary low-speed hi-resolution (24-bit) sigma-delta ADC. This converter takes about 125 ms per sample and provides an effective resolution of about 20-bits (18-bits noise free) over the 0-5 or +/-5 volt ranges. Linearity and accuracy are also improved compared to the normal converter.

For more information about the analog inputs see Section 2.7 and Appendix A of the User's Guide. For data rate information see Sections 3.1 and Sections 3.2. The User's Guide can be found on the UE9 Support page.

Analog Outputs: 

The LabJack UE9 has 2 analog outputs (DAC0 and DAC1) that are available both on screw terminals and the DB37 connector. Each analog output can be set to a voltage between 0 and 4.9 volts with 12-bits of resolution. The analog outputs are based on a true voltage reference.

The analog outputs are updated in command/response mode, with a typical update time of 1.2-4.0 ms depending on communication configuration.

For more information about the analog outputs see Section 2.8 and Appendix A of the User's Guide. For data rate information see Section 3.1. The User's Guide can be found on the UE9 Support page.

Digital I/O: 

The LabJack UE9 has 23 digital I/O channels which can be individually configured as input, output-high, or output-low. 8 of these lines are called flexible digital I/O (FIO) and can be software configured as up to 6 timers and 2 counters.

The first 4 FIO are available on screw terminals and the DB37 connector. All 8 FIO and 3 MIO are available on the DB37 connector, and 8 EIO and 3 CIO are available on the DB15 connector.

Command/response (software timed) reads/writes typically take 1.2-4.0 ms depending on communication configuration. The digital inputs can also be read in a hardware timed input stream where up to 16 inputs count as a single stream channel.

For more information about the digital I/O see Section 2.9 and Appendix A of the User's Guide. For data rate information see Sections 3.1 and 3.2. The User's Guide can be found on the UE9 Support page.

Timers:

Up to 6 FIO can be configured as timers. The timers are very flexible, providing options such as PWM output, pulse timing, pulse counting, and quadrature input.

For more information about the timers see Section 2.10 and Appendix A of the User's Guide. The User's Guide can be found on the UE9 Support page.

Counters:

Up to 2 FIO can be configured as 32-bit counters. For more information about the counters see Section 2.10 and Appendix A of the User's Guide. The User's Guide can be found on the UE9 Support page.

I/O Protection:

All I/O lines on the UE9 are protected against minor over voltages. The AIN lines can withstand continuous over voltage of ±15 volts, the FIO lines can withstand up to ±10 volts, while the EIO/CIO/MIO lines can withstand up to ±6 volts.

Power Supply: 

Power can be provided by the USB cable or an external 5 volt supply (included). When only Ethernet is connected, and an isolated power supply is used (such as the included wall-wart), the entire UE9 is electrically isolated.

High Channel Count Applications: 

By using USB hubs or Ethernet switches, many LabJacks can be interfaced to a single PC, providing an inexpensive solution for low-speed high channel count applications.

Modbus: 

Modbus is an industry standard command/response protocol for data acquisition and control equipment. The UE9 supports Modbus/TCP in hardware, so any software that supports Modbus/TCP can talk to the UE9 with no further software/drivers required. (More Info)

Wireless Data Acquisition: 

Combining the UE9 with a standard 802.11 wireless Ethernet bridge or access point ($50-$200 from any computer retailer) provides inexpensive wireless data acquisition. Applications include high-speed continuous wireless data acquisition, long distance remote sensing and control, or PDA based data acquisition. (More Info)

Satisfaction Guaranteed: 

Everything we sell has a 30-day money back guarantee. If, for any reason, you are not satisfied with a product, contact us to arrange your choice of a refund or replacement. In addition, the LabJack UE9 is covered by a 1-year limited warranty.

Technical Support: 

All LabJacks include lifetime technical support. Support resources include forum, FAQs, email, and telephone.

Drivers and Examples:

 The Support Page has drivers and sample code. We have drivers for the three major operating systems, and examples for most common programming languages.

For more information:

The User's Guide on UE9 Support Page has all the specifics for working with the UE9. You'll also find the quick start guides, and any other literature we've published on the UE9.

  • Power supply: USB
  • Maximum Analog Input Range: ±5 or 0-5 V
  • Analog Output: 2 (12-Bit, 0-5 Volts)
  • Digital I/O: 23 Up to 2 Counters (32-Bits Each)
  • Analog Input: 14 (12-16 Bits Depending on Speed)
  • Resolution: 24-bit Low-Speed ADC for 20-Bit 
  • Timers: (Pulse Timing, PWM Output, Quadrature Input, ...)
  • Serial Protocols: SPI, I2C, and Asynchronous (Master Only)
  • Input Stream Rate: 50+ kHz (Depending on Resolution)
  • Dual-Processor: 168 MHz 
  • Temperature Range: -40 to +85 °C
  • Dimensions: Approximately 75 x 185 x 30 mm

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Customers who bought this product also bought

Drop items here to shop
Product has been added to your cart

Related products