Next product

0.88 N.m NEMA 23 Open-Loop Dual Shaft Stepper Motor

Double shaft bipolar stepper motor FL57STH56-1006B

Add to compare Added to comparison table

Industrial grade small Stepper Motor, ideal for CNC projects and robots. Has a holding torque of 9.0Kg.cm (0.88Nm or 125oz-in). Shaft at both ends.

We recommend DM422C drive with this motor

Manufacturer: Fulling Model No FL57STH56-1006B

Step angle: 1.8°

Voltage: 7.4 V

Current: 1 A

Resistance per coil: 7.4Ω

Inductance per coil: 10

Holding torque: 9.0 Kg.cm

Step angle accuracy: ±5% (full step, no load)

Resistance accuracy: ±10%

Inductance accuracy: ±20%

Temperature rise: 80°C Max.(rated current,2 phase on)

Ambient temperature: -20 to + 50°C

Insulation resistance: 100 MΩ Min. 500 VDC

Dielectric strength: 500 VAC for one minute

Shaft radial play: 0.02 Max. (450 g-load)

Shaft axial play: 0.08 Max. (450 g-load)

Max.radial force: 75 N (20 mm from the flange)

Max.axial force: 15 N

No.of wire: 6 leads

Weight: 0.7 Kg

Shaft diameter: 6.35 mm (Extends 20 mm from front of motor)

Dimension: 56 ×56 mm square face, 56 mm long, 47 mm between mounting holes

Download datasheet file

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Download Warranty Form

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

The product returned will attract a 20% restocking fee.
The customer must pay the delivery costs.
Non standard, custom made or a specially manufactured or imported products are not returnable.
Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.