SpringRC SM-S4303R Continuous Rotation Servo
This continuous rotation servo takes a standard 1 to 2 ms control signal and drives the output shaft at a corresponding speed (rather than to a corresponding position.) ±70 RPM and up to 4.8 kg·cm at 6 V.
The SM-S4303R is a standard-sized servo that has been built by SpringRC specifically for continuous rotation (up to 70 RPM at 6 V), and it is the strongest continuous rotation servo we carry (4.8 kg·cm/67 oz·in at 6 V). It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer. The servo can be controlled using a direct connection to a single microcontroller I/O line without any additional electronics, which makes it a great actuator for beginner robotics projects.
The SM-S4303R continuous rotation servo converts standard RC servo position pulses into continuous rotation speed. The default rest point is 1.5 ms, but this can be adjusted by using a small slotted screwdriver to turn the middle-point positioner. Pulse widths above the rest point result in counterclockwise rotation, with speed increasing as the pulse width increases; pulse widths below the rest point result in clockwise rotation, with speed increasing as the pulse width decreases. Note that this is the reverse of what is described in the datasheet.
Dimensions:
General specifications:
| Speed @ 6 V: | 0.14 sec/60°1 |
|---|---|
| Stall torque @ 6 V: | 66.7 oz·in |
| Speed @ 4.8 V: | 0.16 sec/60°2 |
| Stall torque @ 4.8 V: | 45.8 oz·in |
| Lead length: | 11 in |
| Hardware included?: | Y |
Notes:
- About 70 RPM.
- About 60 RPM.
Documents:
The SM-S4303R is a standard-sized servo that has been built by SpringRC specifically for continuous rotation (up to 70 RPM at 6 V), and it is the strongest continuous rotation servo we carry (4.8 kg·cm/67 oz·in at 6 V). It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer. The servo can be controlled using a direct connection to a single microcontroller I/O line without any additional electronics, which makes it a great actuator for beginner robotics projects.
The SM-S4303R continuous rotation servo converts standard RC servo position pulses into continuous rotation speed. The default rest point is 1.5 ms, but this can be adjusted by using a small slotted screwdriver to turn the middle-point positioner. Pulse widths above the rest point result in counterclockwise rotation, with speed increasing as the pulse width increases; pulse widths below the rest point result in clockwise rotation, with speed increasing as the pulse width decreases. Note that this is the reverse of what is described in the datasheet.
Dimensions:
General specifications:
| Speed @ 6 V: | 0.14 sec/60°1 |
|---|---|
| Stall torque @ 6 V: | 66.7 oz·in |
| Speed @ 4.8 V: | 0.16 sec/60°2 |
| Stall torque @ 4.8 V: | 45.8 oz·in |
| Lead length: | 11 in |
| Hardware included?: | Y |
Notes:
- About 70 RPM.
- About 60 RPM.
Documents:
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.