Next product

TxIsoloop-2 Dual Loop Isolator

1-4 items	AUD229.00 / each
5-9 items	AUD206.10 / each	save 10%
10 or more items	AUD194.65 / each	save 15%

Add to compare Added to comparison table

Loop isolators provide signal protection by electrically isolating the input signal from the output .

TxIsoLoop-1 and TxIsoLoop-2 simplify your application and avoid the undesirable ground loops by providing single and dual loop galvanic isolation. The 0/4-20 mA input is measured and an identical isolated signal is reproduced at the output. Power is drawn from the 0(4)-20 mA input loop, thus no external power supply is needed.

Input Signal (INPUT): 0 to 20 mA; 4 to 20 mA (check minimum current for proper operation)

Maximum Input voltage (Vin max.): 32 Vdc

Voltage Drop (Vdrop): < 3 Vdc

Output Signal (OUTPUT): 0(4) to 20 mA

Max. Load (RL): 1450 R

Accuracy:

0.2 % FS at 0 a 60 °C / RL= 250 R
0.3 % FS at -20 a 75 °C / RL= 250 R

Operating current: > 0.1 mA

Overload: < 40 mA; < 32 Vdc

Response time: 2 ms (at RL= 250 R)

Isolation: 3000 Vac / 10 s; 240 Vac continuous

EMC: EN 61326-1

Ambient temperature range: -20 to + 75 °C

Humidity: 20 to 90 % RH

Protection: IP40

Wire gauge for connections: 0.14 to 1.5 mm²

Recommended torque: 0.8 Nm

Terminal blocks: Injected in Polyamide

Dimension: 78 x 72 x 19 mm

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Download Warranty Form

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

The product returned will attract a 20% restocking fee.
The customer must pay the delivery costs.
Non standard, custom made or a specially manufactured or imported products are not returnable.
Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.