Digigate Profibus DP / Modbus RTU Gateway

Digigate Profibus DP / Modbus RTU Gateway

SKU: SIG-301

Converts between slave devices on a Modbus RTU network and a Profibus DP master.

NOT AVAILABLE FOR BACKORDER

Novus
  • Manufacturer: Novus
    • % off
    $354.94 save $88.74
  • $266.21
Qty:  
In stock(2 items available)

DigiGate Profibus is the ideal equipment for interconnecting a Profibus DP network with a Modbus RTU network. It works as a gateway, operating as a master station in the Modbus network and as a slave station in the Profibus network. Thus, according to its previous configuration, DigiGate will read the data of the other devices (slaves) of the Modbus network and send the read values to the Profibus master. In the same way, it will write at the output of the Modbus slaves according to the Profibus master requests, providing a complete control of the Modbus network devices through the Profibus network.

The device is totally configurable through the application DigiConfig for Windows®, which comes with the product, making access and changing of its parameters easy.

Features:

  • Frontal lit indicators for communication and status
  • Automatic detection of supported baud rate
  • “GSD” file included
  • Termination and polarization resistors included (activated by jumper)

Power supply: 10 a 35 VDC. 

Internal protection against inverse polarity: Yes

Electrical insulation between the Profibus interface and the rest of the device: 1000 Vac

Profibus:

  • Protocol: Profibus DP
  • Operates at the entire range of communication rates: From 9600 bps to 12 Mbps
  • Addressing range: 0 to 125
  • Profibus connection: Terminals for wires, comes with an adapter for DB9

Modbus:

  • Operates: From 1200 bps to 115200 bps
  • Commands available for data reading: 
    • “01 - Read Coil Status”
    • “02 - Read Input Status”
    • “03 - Read Holding Register” and 
    • “04 - Read Input Register”
  • Commands available for data writing: 
    • “05 - Force Single Coil”
    • “06 - Preset Single Register”
    • “15 - Force Multiple Coils” and 
    • “16 - Preset Multiple Registers”
  • Protection at the bus: ±60 Vdc, 15 kV ESD

Operating environment: 0 to 50 °C, 30 to 80% of relative humidity, without condensation

Mounting: DIN 35 mm rail

    • SKU
      SIG-301
    • Weight
      0.15 kg
    • Dimensions (L x W x H)
      10 x 8 x 10 cm

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Customers who viewed this product also bought