3 Axis Stepper Driver and Breakout Board
The Leadshine MX3660 is a high performance 3-axis stepper drive with built-in breakout board and I/O based on the latest DSP technology.
The Leadshine MX3660 is a high performance 3-axis stepper drive with built-in breakout board and I/Os based on the latest DSP technology. It is specially designed for EASY and RAPID control of up to three 2-phase stepper motors. The MX3660 3-axis stepper drive operates under 20 to 60 VDC input voltage and can output up to 6.0 A current (peak of sinusoidal) per axis. It takes step & direction control and is easy to implement for OEM applications.
By adopting Leadshine advanced stepper motor control technology, the MX3660 3-axis stepper drive can power stepper motors in high precision, at extra smoothness, and with extra low motor heating & noise. It is featured with anti resonance, multi-stepping, vibration suppression, input command smoothing, 50% idle current reduction, etc.
The MX3660 3-axis stepper drive is easy to configure. Via the 6-pin DIP switch of each of the 3 stepper drive modules, a user can easily set the output current and micro step to one of their 8 available settings, 1.45 to 6.0 A and full step - 1/64 respectively. Each axis can have its own current & micro step configurations to satisfy different requirements for the controlled stepper motor. For example, a user can set axis X at 8 micro step & 6.0 A for a NEMA 34 motor, axis Y at 10 micro step & 2.72 A to drive a NEMA 23 motor, and axis Z at 16 micro step & 1.45 A to for a NEMA 17 motor.
The MX3660 3-axis stepper drive is integrated with a breakout board with a DB25 connector and built-in I/Os. This allows convenient, easy and quick connection for controllers (e.g. PC-based control systems, motion controllers, PLCs) and external devices (limit switches, VFD). It simplifies system setup, save installation space & time, minimizes wiring, increases reliability, and cuts costs. In addition, the MX3660 offers a built-in digital smoother to allow filtering/smoothing of noise pulses for better system performance (application dependent).
The MX3660 adopts a modular design. If any of the three stepper drive modules malfunctions, a user can simply replace it with a Leadshine SDM660 stepper drive module at minimal cost.
Features:
- Power up to 3 stepper motors of NEMA 17, 23, 24, or 34
- Sophisticated stepper motor control based on the latest DSP technology
- Built-in breakout board and I/Os
- Step & direction Control
- Damping and anti resonance
- Allowing individual output current & micro step settings for each axis
- Input pulse smoothing for less jittering, higher torque, and quicker response
- Extra low motor heating & noise
- Extra smooth motor movement
- Simple micro step & output current configuration via DIP switches
- Compact size and easy setup
- 50% automatic idle current reduction
Supply voltage: 20 to 60 VDC
Output current: 1.45 to 6 A
Max input frequency: 200kHz (per axis)
Axis: 3
Phase: 2 (also works for 4-phase 0.9° stepper motors)
Micro step: Full, Half, 1/4, 1/8, 1/10, 1/16, 1/32, 1/64
Output current (per axis): 1.45A, 2.08A, 2.72A, 3.37A, 4.05A, 4.72A, 5.35A, 6A
Number of digital inputs: 13
Number of digital outputs: 4
Number of analog inputs: 1
Digital input voltage: 0 to 12 VDC
Digital output voltage: 0 to 24 VDC
Analog output signal voltage: 0 to 8.9 VDC (at 10 VDC supply voltage)
Minimum step width: 2.5 μs
Minimum direction setup time: 5 μs
Idle current percentage: 50%
Protection: Over current, over voltage, emergency protection activated
Compliance/ certification: RoHS
Weight: 450 g
Dimension: 162 x 77.5 x 37 mm
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
