|

TCW260 Energy monitoring module

In stock (4 items available)
  • Weight
    0.2 kg
  • SKU
    TCC-026

TCW260 is an energy monitoring module which supports galvanic isolated digital inputs, analog inputs, and RS-485 interface and has Ethernet connectivity.

Buy more for less:
Quantity ex GST incl GST Saving
1-4 items AUD414.95 / each AUD456.45 / each  
5 or more items AUD373.45 / each AUD410.80 / each save 10%
  • AUD414.95 ex GST
  • AUD456.45 incl GST
Qty:  

Energy monitoring module TCW260 supports galvanic isolated digital inputs, analog inputs, and RS-485 interface.

All 4 digital inputs are S0 hardware compatible. They can be used to support up to 4 energy meters with S0 pulse outputs. The digital inputs can also support general dry contact output (ON/OFF) sensors. The analog inputs can be used either in the current loop (0/20mA) or voltage (0/10V) mode. They can be connected to voltage and current transducers with suitable analog outputs. MODBUS RTU protocol is realized over the hardware interface RS-485. The energy monitoring module supports up to 24 registers/devices.

All primary parameters (digital and analog inputs as well as MODBUS RTU registers) can be used to arrange up to 24 channels. The channels can be specified as general (current, voltage, temperature, etc.) or cumulative (energy, volume, etc.). All channels can be monitored as digits and as graphs directly on the standard browser over the WEB interface. All channels can be used to arrange up to 24 independent alarms. There are four categories for every alarm. The alarms can also be monitored as graphs.

The module supports M2M protocols over Ethernet – SNMP, HTTP API, and MODBUS TCP. Using them, the device can be used as a part of energy monitoring systems.

  • Up to 24 channels for voltage/current or energy monitoring;
  • Up to 24 categorized alarms with flexible setup;
  • Graphs for monitored channels/alarms directly on the browser;
  • 4 isolated digital inputs with S0 interface (EN62053-31) compatability;
  • ON/OFF and counter modes for the digital inputs;
  • 6 isolated analog inputs with 0/20mA or 0/10V modes;
  • RS-485 isolated interface for up to 24 MODBUS RTU registers;
  • Password protected WEB based configuration and control;
  • Data logger for 70000 records;
  • NTP support;
  • Periodical HTTP Post with XML/JSON files for client-server systems;
  • HTTP API commands;
  • SNMP v.2 support;
  • Dynamic DNS support of DynDNS, No-IP, and DNS-O-Matic;
  • Backup/Restore for easy device settings multiplications;
  • Remote firmware update over the WEB interface.

TC Monitor is easy to use Windows application for monitoring and control of TCW products. TC Monitor can collect and display data from controllers installed in different locations (sites). The collected data is stored in SQL database and can be displayed or exported in MS Excel format for further analysis. TC Monitor has a simple web interface, which enables easy and fast configuration. Monitored parameters can be 1-wire sensors, digital and analog inputs and relay outputs.

The free version of TC Monitor provides 10 credits, this means up to 10 different parameters can be monitored and logged.

Power Requirements

  • Supply Power: 10 to 32VDC
  • Current Consumption: 220mA @ 12VDC (without RS-485 powering)

RS-485 Interface

  • Isolation: Isolated (1000VDC)
  • Output Voltage (pin 7 of RJ-45) : 5.0± 0.3VDC
  • Maximum output current (pin 7 of RJ-45): 0.2 A

Digital Inputs

  • Isolation: Isolated(1000VDC)
  • Mode: OPEN/CLOSED(“Dry contact”)or COUNTER (S0-pulse interface outputs)
  • Maximum input voltage: +5.5VDC
  • Sampling rate: 1ms
  • Digital filtering time interval: 5 to 60000ms 

Analog Inputs

  • Isolation: Isolated(1000VDC)
  • Type: Single ended
  • Resolution: 10 bits 
  • Mode: Voltage or current loop
  • Input Range: 0/10V or 0/20mA
  • Accuracy: ±1%
  • Sampling Rate: 600mS per channel (averaged value of 100samples)
  • Input Impedance: 1MΩ  (min.)

Physical

  • Operating Temperature: -20 to 55°C
  • Dimensions: 145 x 90 x 40 (mm)
  • Weight: 145 x 90 x 40 (mm)

Warranty

  • Warranty period: 3 years

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Drop items here to shop
Product has been added to your cart

Customers who viewed this product bought