Temp-WM Temperature Sensors 4-20mA output
The Temp-WM Temperature Sensor is a wall-mounted device that measures temperatures from -20 to 70°C and provides a linear 4-20mA output.
The TEMP-WM series incorporates the best high-accuracy and great-stability temperature sensors. it converts the measured values into linear 4 to 20 mA signals.
As it is a microprocessor, it can be fully configured using the TxConfig-USB communication interface and the SigNow application, available for Android and Windows.
The TEMP-WM model is dedicated to wall-mounted applications.
Features
- Internal protection against reversed voltage wire polarity
- No electrical isolation between input, output, and power circuits
Taking Care with Sensors
The Temp-WM is designed primarily for commercial offices and buildings where the air is relatively clean and condensation does not occur. The calibration of the humidity sensor may be changed if it is exposed to contaminant vapors or extreme humidity and temperature conditions for long periods. If used in a dusty environment a Sintered Bronze Dust Cover (SKU RHT-030)is recommended
- Sensor measuring range:
-20 to 70 °C (-4 to 158 °F)
• Response time:
up to 30s (with air moving at 1 m/s)
• Measurement accuracy:
± 0.5 °C @ 25 °C (77 °F) (with air moving at 1 m/s or 3.28 ft/s)
• Analog output:
4 to 20 mA or 20 to 4 mA, 2-wire type, loop-powered
• Analog output resolution:
0.0008 mA
• Operating temperature:
-20 to 70 °C (-4 to 158 °F), 0 to 95 % RH
• Connections:
Internal terminal blocks, via cable glands
• Materials:
PA-GF
• Degree of Protection:
Housing: IP65, Sensor Capsule: IP40
• Configuration:
SigNow software for Windows or Android via the TxConfig-USB configuration interface
• Certifications:
CE Mark
• Internal protection against reverse polarity of the supply voltage.
• Electrical isolation between input, output and supply circuit. - Dimensions:
70 x 80 x 35 mm
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
