|

Ursalink UC1414 4G SMS Controller

In stock (14 items available)
  • Weight
    1.5 kg
  • SKU
    ULC-005

The Ursalink UC1414 is a budget priced 4G SMS Controller. It has 2 digit inputs and 2 relay outputs. SMS messages can be sent to up to 6 phone numbers on change of state of an input and the operation of the relays can be controlled by sending SMS messages from your mobile phone.

Buy more for less:
Quantity ex GST incl GST Saving
1-4 items AUD259.95 / each AUD285.95 / each  
5 or more items AUD233.95 / each AUD257.35 / each save 10%
  • AUD259.95 ex GST
  • AUD285.95 incl GST
Qty:  

The UC1414 is a 4G Controller which is easy to configure. It is fitted with 2 digit inputs and 2 relay outputs. SMS alarm messages can be sent to up to 6 phone numbers on change of state of a digital input. It allows 2 phone numbers to send commands via SMS/USSD to the UC1314. The command SMS messages to operate the digital outputs can be easy to remember such as "Pump ON" and "Pump OFF". It also supports multiple trigger conditions and actions, enabling users to create various combinations of commands according to their needs. The package comes with a stubby cellular antenna.

With rich functionalities and small form-factor design, the UC1414 is able to be attached to many electronic devices at homes, in offices, or on any other sites. The UC1414 is fitted with a real time clock which you can program the relays to switch on and off according to time and day of the week. Also two UC1414 devices can be programmed so that when a digital input is triggered on one device it sends an SMS to the other to operate its relay.

A TTL to serial interface is provided to configure the UC1414. A Z-Tek USB to Serial cable is available see belowThe UC1414 comes with a rubber duck antenna. A magnetic base 3G/4G antenna is available if the UC1414 is place in a steel cabinet.

  • Easy to setup with point-and-click SmartSetup computer software
  • Dozens of Combinations of Trigger Condition and Action
  • Built-in with 2 opto isolated digital inputs and 2 relay outputs
  • Support USSD and no extra fees is charged
  • Password Protection to Prevent Unauthorized User
  • Embed timer and hardware watchdog
  • Rugged metal enclosure, optimized for shelf mounting
  • Cellular Interface Connector: 1 × 50 O SMA (Center PIN: SMA Female)
  • Cellular Interface SIM: Micro SIM (Inside the device)
  • Configuration Interface Port: 1 × TTL Intraface
  • Configuration Interface  Baud Rate: 9600 bps / 57600bps / 115200bps
  • IO Digital Inputs: 2 x Opto-isolated Digital Inputs, 3-24 VDC Voltage
  • IO Digital Outputs: 2 x SPDT Relay Contact Rating: 3 amp DC (Max: 30 V) or 3 amp AC (Max: 250 V)
  • Power Supply: 5-24 VDC (Standard adapter: DC 12 V/0.5 A)
  • Ingress Protection: IP30
  • Dimensions: 79 x 60 x 24 mm (3.11 x 2.36 x 0.94 in)
  • LED Indicators: 1 × Status, 1 × ACT
  • Operating Temperature: -40°C to +70°C Note-Reduced Cellular Performance Above 60°C
  • Relative Humidity: 0% to 95% (non-condensing) at 25°

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Customers who bought this product also bought

Drop items here to shop
Product has been added to your cart

Related products

Customers who viewed this product bought