End cap for 72 mm series modular DIN rail mount holds 10 mm of 72 mm tall PCB.

11.2 mm Base Section for 72 mm series modular DIN rail mount holds 11.2 mm of 72 mm tall PCB.

22.4 mm base section for 72 mm series modular DIN rail mount holds 22.4 mm of 72 mm tall PCB.

44.8 mm base section for 72 mm series modular DIN rail mount holds 44.8 mm of 72 mm tall PCB.

Base mount clip for 107 mm series modular DIN rail mount. Suits standard top-hat, miniature top-hat and "G" style rails.

End cap for 107 mm series modular DIN rail mount holds 10 mm of 107 mm tall PCB.

11.2 mm Base Section for 107 mm series modular DIN rail mount holds 11.2 mm of 107 mm tall PCB.

22.4 mm Base Section for 107 mm series modular DIN rail mount holds 22.4 mm of 107 mm tall PCB.

44.8 mm Base Section for 107 mm series modular DIN rail mount holds 44.8 mm of 107 mm tall PCB.

Standard male to female serial cable. DE-9 on both ends with all pins connected through. 1.8 m.

Programmable Timer 24VAC/DC Powered.

Unidirectional speed controller takes analog voltage (0 to 5 VDC) or current (0/4 to 20 mA) as its control signal. Suits 12 or 24 V motors up to 8 A continuous.

Parallel Port Interface card with Relays and Safety Charge Pump Option. 12 to 24VDC power

Leadshine DCS810 brushed DC servo motor driver for 20 to 400W motors.

DM556 fully digital microstepping stepper motor driver with anti-resonance tuning. Automatic or computer-driven tuning. 20 to 50 VDC powered with output current up to 5.6 A peak.

DB25 Male To DB25 Female Cable 1.8 m

USB Type A Male to Type B Male Cable

PC or PLC based 6.5-36 VDC I/O Module 4DI+8DO+3AI via Modbus protocol.

KTA-224 can now be powered 6.5-36 VDC, therefore KTB-224 has been discontinued.

Robust USB converter for four-wire (full duplex) RS-422 and RS-485 or two-wire (half duplex) industrial serial busses. 1.5 kVDC isolation between PC and serial bus. Best-of-class drivers.

RJ45 to screw terminal card. Designed to enable easy connection of RS-485 modules to a MOSCAD ACE

RJ45 to screw terminal card on DIN rail mount. Designed to enable easy connection of RS-485 modules to a MOSCAD ACE

RJ45 to screw terminal card on DIN rail mount with RJ45 cable. Designed to enable easy connection of RS-485 modules to a MOSCAD ACE.

High Temperature 10W Switchmode Supply 3.3V/3A DC output

20 W slimline single output industrial DIN rail power supply. 12 VDC at up to 1.67 A output.