Ethernet

TC Monitor is software for monitoring and control of Ethernet (TCW) and GSM/GPRS (TCG) controllers. The supported devices are TCW122B-CM, TCW181B-CM, TCW241, TCW220, TCW210-TH, TCG120 and TCG140. Free version allows 10 parameters to be monitored

Multifunctional device for remote monitoring and control over Ethernet. Has 2 digital inputs, 2 relay outputs, 2 analogue inputs and can monitor up to 2 "1-wire" based temperature or humidity sensors. Can be configured to send email messages, send SNMP traps and toggle the relay outputs on alarm conditions.

Each TCW122B-RR is an Ethernet based I/O module that has two digital inputs and two relay outputs. Two units can be paired in order to seamlessly send digital IO data to the other paired device.

You can power this unit with our power plug PLP-003

TCW122B-WD is an IP watchdog monitoring module, specially designed for a failsafe monitor system.

TCW181B-CM is 8-channel remote relay board, which is designed to work in Ethernet networks. The device is manageable by WEB interface, SNMP programs or user application over HTTP/XML API commands.

TCW210-TH is a temperature and humidity data logger with Ethernet interface for communication. Real-time data and charts of temperature, humidity and dew point can be monitored with a standard web browser

TCW220 is an Ethernet data logger for general data acquisition applications. It has 2 analog inputs, with 10-bit resolution and 2 discrete inputs. It utilises 1-Wire interface for up to eight 1-Wire sensors.

The TCW241 is an Ethernet control unit with 4 digital inputs, 4 relay outputs, 4 analogue inputs and a 1-Wire interface for up to 8 x 1-Wire sensors.

The TCW242 is an Ethernet control unit with 4 digital inputs, 4 relay outputs, 4 analog inputs and Modbus RTU sensors for up to 24 sensors (registers). 

TCW260 is an energy monitoring module which supports galvanic isolated digital inputs, analog inputs, and RS-485 interface and has Ethernet connectivity.

TCW280 is a MODBUS TCP/IP module with 2 analog voltage or current loop outputs, 4 open drain outputs with PWM and ON/OFF modes and 2 relays with normally open and normally closed contacts.