Sensors

Cabled integrated sensor suite collects weather data and sends it to the cabled Vantage Pro2 console or weather Envoy.

Cabled integrated sensor suite collects weather data and sends it to the cabled Vantage Pro2 console or weather Envoy. Includes solar radiation and UV sensors.

High quality wind speed and direction sensor as used by the Davis Vantage Pro2™ & Vantage Pro® weather stations. Suits our anemometer interface cards KTL-250.

Silicon photodiode with wide spectral response for measuring solar irradiance. Suits our Davis weather stations and UV-Solar-Wind Modbus gateway.

Ultraviolet radiation sensor for our Davis weather stations or UV-Solar-Wind Modbus gateways. Measures the sunburning portion of the UV spectrum.

Replacement lens for models RG-9, RG-11, and RG-15

Hydreon RG-11 Optical Rain Sensor with a Novus 6 Digit Counter.

Senses rainfall with no moving parts.
6 different modes of operation: Tipping bucket, Skylight rain sensor, Wiper control, Drop detection, Condensation / Frost Sensing, or Irrigation control sensor.

Hydreon RG-15 Solid State Tipping Bucket is a rainfall-measuring device intended to replace conventional tipping buckets.  

Hydreon RG-9 Solid State Rain Sensor is a rain sensor  intended to detect and communicate when a pre-selected rain intensity has been reached

Senses the level of surface moisture on foliage. Plugs into the Wireless Leaf & Soil Moisture/Temperature Station through which it speaks to a Vantage Pro2 console or Envoy.

Easy to use pipe wind speed sensor with 4 to 20 mA signal output and 1.5 meter cable.

RK120-01 Combined Wind Speed & Direction Sensor with 4-20 mA outputs. 12~24 VDC powered

RK120-01 Combined Wind Speed & Direction Sensor with 4-20 mA outputs. 12~24 VDC powered

The RK200-02 PAR (photo synthetically active radiation) Sensor is mainly used for measuring solar radiation within 400~700nm wavelength for agricultural applications.

The RK200-07 UV Radiation Sensor is used for measuring UVA and UVB radiation within 250~400nm wavelength.

The Rika RK210-01 Illuminance Sensor is used to measure ambient light levels. It has a 0-100 lux range and 0-10VDC Output.

The Rika RK210-01 Illuminance Sensor is used to measure ambient light levels. It has a 0-2000 lux range and 4-20mA Output.

The Rika RK210-01 Illuminance Sensor is used to measure ambient light levels. It has a 0-20000 lux range and 0-10VDC Output.

RK300-02 Dust Sensor using laser scattering principle, detecting the existence of dust(PM2.5) particle concentration in the air.

RK300-02 Outdoor Dust Sensor using laser scattering principle to detect the existence of dust particle concentration in the air. Can detect 1.0μm particles with good consistency and stability. 

This model only detects atmospheric particulate matter (PM) that have a diameter of less than 2.5 micrometers (PM2.5). Other model/combinations are available to detect PM1.0 and PM10.

Full model:  RK300-02-B-B-B-C-2000

RK300-02 Outdoor Dust Sensor using laser scattering principle to detect the existence of dust particle concentration in the air. Can detect 1.0μm particles with good consistency and stability. 

This model only detects atmospheric particulate matter (PM) that have a diameter of less than 2.5 micrometers (PM2.5). Other model/combinations are available to detect PM1.0 and PM10.

Full model:  RK300-02-B-B-B-A-2000

RK300-02 Outdoor Dust Sensor using laser scattering principle to detect the existence of dust particle concentration in the air. Can detect 1.0μm particles with good consistency and stability. 

This model detects atmospheric particulate matter (PM) that have a diameter of less than 2.5 micrometers and 10 micrometers (PM2.5 and PM10 combined).

PM10 (particles with a diameter of 10 micrometres or less): these particles are small enough to pass through the throat and nose and enter the lungs 

Full model:  RK300-02-D-B-B-A-2000