New arrivals

Stainless steel vertically mount liquid level sensor, 200 mm in length.
Floats can be adjusted to the desired length within the sensor's overall length.

We can adjust the floats to your desired length for an extra fee. Just select this option from the drop-down menu and let us know your dimensions.  Please note there will be a +/- 5mm accuracy to your length, and there is a limitation with the distance between each float.
Eg: if the bottom float is at 75mm the top one can not be at 100mm, due to the float's size and the space they require to move up and down.

Stainless steel vertically mount liquid level sensor, 400 mm in length.
Floats can be adjusted to the desired length within the sensor's overall length.

We can adjust the floats to your desired length for an extra fee. Just select this option from the drop-down menu and let us know your dimensions.  Please note there will be a +/- 5mm accuracy to your length, and there is a limitation with the distance between each float.
Eg: if the bottom float is at 75mm the top one can not be at 100mm, due to the float's size and the space they require to move up and down.

Stainless steel vertically mount liquid level sensor, 600 mm in length.
Floats can be adjusted to the desired length within the sensor's overall length.

We can adjust the floats to your desired length for an extra fee. Just select this option from the drop-down menu and let us know your dimensions.  Please note there will be a +/- 5mm accuracy to your length, and there is a limitation with the distance between each float.
Eg: if the bottom float is at 75mm the top one can not be at 100mm, due to the float's size and the space they require to move up and down.

GT Series - Isolated signal converter with 2KV 3 way isolation Input/Output/Power. 0 to 600VAC Input (True RMS) and 4-20mA output. 22 to 60 VAC/DC powered

IPSI-5NO1A  Shielded (flush) M5, 3-wire NPN-style output with NO contact type. It has a sensing distance of ~1 mm. Screw on connector. Choose 2m cable with straight or 90 degree 4 wire M8 connector

IPSI-5PO1A  Shielded (flush) M5, 3-wire PNP-style output with NO contact type. It has a sensing distance of ~1 mm. Screw on connector. Choose 2m cable with straight or 90 degree 4 wire M8 connector

The digital output module MU210-401 has 16 relay outputs 5A at 250VAC and has support for Modbus TCP, MQTT and SNMP

IDC26-DSUB25 Female Ribbon Cable used to connect CNCDrive's Motion Controllers to Parallel Port Breakout Board. Length = 250mm. 

IDC26 Male - IDC26 Male Ribbon Cable used to connect CNCDrive's Motion Controllers to Parallel Port Breakout Board. Length = 250mm. 

Combine Ethernet Motion Controller and Breakout Board in a single module. Can control up to 6-axes with Mach3, Mach4 or UCCNC software with onboard I/Os. Up to 400kHz step frequency. The controller can be connected to an additional Breakout Board to extend the number of I/Os. 

Note: The AXBB-E requires 2x power supplies - 1x 5VDC and 1x 12-24VDC. 

Single Port Breakout Board compatible with traditional Parallel Port. The board has 12 outputs and 5 inputs. All I/Os are optically isolated with 10Mbit/s max speed.

Machine control software compatible with all CNCDrive's motion controller. It can control up to 6 axes. Modern alternative to Mach 3 and Mach 4. 

Note: each UCCNC license required per motion controller. The license key is tied to the serial number of the motion controller and are not tied to the control computer in anyway - therefore it can be installed on multiple computer as long as they use the same motion controller.  

Huba 604 is used as a DP flow switch in ventilation ducts for the control of filters and fans, and in primary and secondary control systems for the control of dampers. Pressure range  0.2-3mbar (options 1-10, 0.5-5, 10-50 mbar)

GT Series - Isolated signal converter with 2KV 3 way isolation Input/Output/Power. 0 to 300VDC Input and 4-20mA output. 22 to 60 VAC/DC powered

GT Series - Isolated signal converter with 2KV 3 way isolation Input/Output/Power. 0 to 300VAC Input (True RMS) and 4-20mA output. 22 to 60 VAC/DC powered

Directly replaces the traditional Parallel port with Ethernet. Can control up to 6-axis with Mach3, Mach4 or UCCNC software. Up to 400kHz step frequency operation. Fast communication with data buffer for robust and stable operation. 

Directly replaces the traditional Parallel port with modern USB. Can control up to 6-axis with Mach3, Mach4 or UCCNC software. Up to 100kHz step frequency operation, Fast communication with data buffer for robust and stabile operation. 

***Mini USB cable not included - can be purchased here: USB-003. 

Wireless jog pendant designed to be used with Mach3 or UCCNC software. Has Large LCD screen with backlight and can display up to 6 axes on screen. 10-15 meters transmit range using radio.