Temperature RTD and T/C

Sensor is equipped with a RTD PT1000 temperature sensor embedded into the 6.0mm stainless steel cable clip with a 3metre cable and 2 wires at end. 

IP66 rated temperature sensor. Loop powered, 4 to 20 mA output with -20 to 60 ºC measurement range. Aluminium and stainless steel for long life outdoors.

DS18B20 digital thermometer in ⌀6 × 30 mm probe with 100 cm cable. -55 to 125 °C range with ±0.5 °C accuracy from -10 to 85 °C.

100 mm probe Pt100 RTD sensor with standard head. 3 wire connection and room in the head for a signal conditioner.

J-type thermocouple in a stainless steel tube and 1/4" NPT thread with glass fibre sheathed cable good for 0 to 400 ºC.

J-type thermocouple in a stainless steel tube and 1/4" BSP thread with 2 meter glass fibre sheathed cable good for 0 to 400 ºC

J-type thermocouple in a stainless steel tube and 1/4" BSP thread with 2 meter stainless steel sheathed cable good for 0 to 400 ºC

J-type thermocouple in a stainless steel tube with glass fibre sheathed cable good for 0 to 400 ºC.

J Thermocouple probe with magnet fixing for surface temperature measurement range -50 to 200 ºC.

J Thermocouple probe with screw fixing for surface temperature measurement range -50 to 200 ºC.

K-type thermocouple in a stainless steel tube and 1/4" NPT thread with glass fiber sheathed cable good for 0 to 400 ºC
304 (1.4301) STAINLESS STEEL

K-type thermocouple in a stainless steel tube and 1/4" NPT thread with glass fibre sheathed cable good for 0 to 400 ºC
316 (1.4401) STAINLESS STEEL

Ceramic K type thermocouple rated to 1200°C.

K Thermocouple probe with clamp fixing for surface temperature measurement. -50 to 200 ºC

Mating pair of K-Type thermocouple connectors with standard round hollow pins.

K type thermocouple with standard connector to suit multimeters. Terminates in a steel probe.

Spring K Thermocouple probe for surface temperature measurement. 0 to 400 ºC

K-type thermocouple in a stainless steel tube and 1/4" BSP thread with 2 meter glass fibre sheathed cable good for 0 to 400 ºC

K-type thermocouple in a stainless steel tube and 1/4" BSP thread with 2 meter stainless steel sheathed cable good for 0 to 400 ºC

K-type thermocouple in a stainless steel tube with glass fibre sheathed cable good for 0 to 400 ºC

K Thermocouple probe with magnet fixing for surface temperature measurement. -50 to 200 ºC

K Thermocouple probe with magnet fixing for surface temperature measurement. 0 to 350 ºC

K Thermocouple probe with screw fixing for surface temperature measurement. -50 to 200 ºC

40 mm Straight Tube PTC Thermistor Temperature Sensor with 2m Silicon cable. Max operating temperature 130 ºC. These are suitable for use with PTC Emko ON-OFF controllers