Serial Converters

Pair of small DIN rail mounting clips and screws to suit our ATO-xxx and TOD-xxx range of converters.

Converts CAN to RS-232 through a 2.0 kV optical isolation barrier. Supports CAN2.0A and CAN2.0B protocol. DB9 Female connector for RS232, screw terminals for all other CAN and power connections.

Converts CAN to RS-485 through a 2.0 kV optical isolation barrier. Supports CAN2.0A and CAN2.0B protocol. Screw terminals for all other RS485, CAN and power connections.

Converts RS-232 to RS-422 and RS-485 through a 2.5 kV optical isolation barrier. Female DB-9 (RS-232) to male DB-9 and RJ45 (RS-422/RS-485). Screw terminal adapter included.

Converts RS-232, RS-422 or RS-485 to RS-422 and RS-485 through a 2.5 kV optical isolation barrier. Female DB-9 for RS-232 and screw terminals for all other connections.

A RS485 Hub which allows one RS-485 bus or one RS-232 bus to be divided into 4 fully isolated RS-485 buses.

The Yotta Control A-1521 is an isolated RS232 to RS232/422/485 serial converter. Features baud rate to 115.2Kbps, 3000VDC isolation protection and 10~30VDC powered

Converts USB to RS-232, RS-422 or RS-485. 2 kV optical isolation barrier between the USB and RS485/RS422. Male DB-9 for RS-232 and screw terminals for all other connections.

Port-powered, opto-isolated RS-232 to RS-485 converter. DE-9 female connector on the RS-232 side, DE-9 male or screw terminals on the RS-485 side. Optical isolation protects devices from transient surges and ground loops.

Simple in line module converts RS-232 to RS-422. Draws power from the RS-232 port. Female to male DE-9 connectors with screw terminal adapter for RS-422.

Simple in line module converts RS-232 to RS-422 and RS-285. Draws power from the RS-232 port. Female to male DE-9 connectors with screw terminal adapter for RS-422/RS-485.

Simple, non-isolated, port-powered RS-232 to RS-485 serial converter.