Process Meters (24x48mm)

Small 0 to 10 V panel meter with 24 × 48 mm red LED display. Configurable scaling and offset. 24 VDC Powered.

Configurable, in-loop display of process variables. Scale and offset setting allow the value to be displayed in appropriate engineering units.

5 Digit Process Indicator(24X48mm) 4-20mA Input, 24VAC Powered.

Not available for backorder

Micro-process meter five digit process indicator accepts 4 to 20 mA signal from 2 or 3 wire sensors. Features include 24 VDC excitation for powering 4 to 20 mA transmitters and 1 alarm relay. 22 to 60 VDC powered.

Micro-process meter five digit process indicator accepts 4 to 20 mA signal from 2 or 3 wire sensors. Features include 24 VDC excitation for powering 4 to 20 mA transmitters and 1 alarm relay. 230VAC powered.

Mini-Type 4-20 mA Panel Meter, 12 VDC Powered.

IS-D11-3M Programmable 4-20mA meter

Easy to mount the ITP11 fits into a standard 22.5 mm borehole for signal lamps and can be connected to any transmitter with a 4-20 mA output. The measured values are scalable and there is also an optional square root function.

Easy to mount the ITP11 fits into a standard 22.5 mm borehole for signal lamps and can be connected to any transmitter with a 4-20 mA output. The measured values are scalable and there is also an optional square root function.

The ITP11-W easily mounts on a wall, DIN rail or a pipe and can be connected to any transmitter with a 4-20 mA output. The measured values are scalable and there is also an optional square root function.

The ITP11-W easily mounts on a wall, DIN rail or a pipe and can be connected to any transmitter with a 4-20 mA output. The measured values are scalable and there is also an optional square root function.

Easy to mount the ITP14 fits into a standard 22.5 mm borehole for signal lamps and can be connected to 0-10 V or 4-20 mA signals. The measured values are scale-able and there is NPN output for control or alarm function.

Easy to mount the ITP14 fits into a standard 22.5 mm borehole for signal lamps and can be connected to 0-10V or 4-20mA signals. The measured values are scalable and there is NPN output for control or alarm function.

The ITP15 Bar Graph Display is a compact panel-mount process indicator that is intended to visualize an analog input signal in the range from 0 to 100% with 10 bars 10% each. The input signal can be either a linear voltage signal of 0(2)-10 V or a current signal of 0(4)-20 mA.