Gateways

Converts between slave devices on a Modbus RTU network and a Profibus DP master.

NOT AVAILABLE FOR BACKORDER

Modbus RTU slave providing precise date, time, position, altitude and speed data from GNSS receiver. Highly configurable.

The HD67029-xxx are M-Bus / Modbus Slave converters. They allow to monitor M-Bus salve meters (like SIEMENS, Kamstrup, Maddalena, Sontex, etc. meters) with a Modbus Master net (like a PLC exc). HD67029-B2-485-20 can manage 20,40,80,160 or 250 meters depending on model.
 
 

The HD67044-B2-xxx are M-Bus Master / Modbus TCP Slave converters. They allow to monitor M-Bus slave meters (like SIEMENS, Kamstrup, Maddalena, Sontex, etc. meters) with a Modbus TCP Master net (like a PLC exc). HD67044-B2-20 can manage 20,40,80,160 or 250 meters depending on model.
 
 

This series of products allows to integrate a Modbus slave network with a SNMP net.

This product will allow you to communicate between a Modbus Master and a Modbus TCP Slave.

The HD67599-A1 from ADFWeb is a EtherNetIP / J1939 Converter.

This product will allow you to connect some EtherNet/IP Slaves (for example a Meters, Switches etc..) with an Ethernet network in order to exchange information between the networks.

This product will allow you to communicate between a BACnet MSTP Master and a Modbus Slave.

This product will allow you to communicate between a BACnet IP Master and a Modbus Slave.

This product will allow you to communicate between a BACnet MSTP Master and a Modbus Master.

This product will allow you to communicate between a Bacnet IP Master and a Modbus Master.

This products allows you to interface a BACnet MSTP network with a BACnet IP network. The converter supports both BACnet/IP on Ethernet side and BACnet MSTP on RS485 side.

This product will allow you to communicate between a BACnet IP Slave and a Modbus Master.

This product will allow you to communicate between a BACnet MSTP Slave and a Modbus Master.

This product allows you to connect BACnet Slaves with a PROFINET Master.

This product allows you to monitor HART slave devices (like Sensors, etc..) with a Modbus master (like PLC, Supervisory System etc..). It also can manage up to 15 Hart devices.
 

This product allows you to monitor HART slave devices (like Sensors, etc..) with a Modbus TCP master (like PLC, Supervisory System etc..). It also can manage up to 15 Hart devices.
 

This product allows communication between a Modbus Slave and the MQTT net.

This product will allow you to communicate between a Modbus TCP Slave and the MQTT net.

Interfaces a Davis Instruments Weather Station to a Modbus TCP/IP or RTU network

Modbus TCP to Modbus ASCII/RTU converter gateway allows Modbus TCP masters to communicate with serial Modbus slave devices via isolated RS-422/485 interfaces with TB5 screw terminals.

Modbus TCP to Modbus ASCII/RTU converter gateway allows Modbus TCP masters to communicate with serial Modbus slave devices via RS-232/RS-485/RS-485 interfaces.

Modbus TCP to Modbus ASCII/RTU converter gateway allows Modbus TCP masters to communicate with serial Modbus slave devices via RS-232/RS-485/RS-485 interfaces. It is fitted with Terminal block not D9 connector.