TRC-H-2A3R-BAC Touchscreen Room Controller are attractive flush mounted BACnet MS/TP controllers with a large colour intuitive 3.5” touchscreen for viewing the system status and modifying the settings.

End plates to suit SKJ-2.5XG series.

BAG OF 10

Milesight EM320-TH is LoRaWAN-based temperature and humidity sensor. EM320-TH can be widely used for both indoor and outdoor application such as offices, greenhouses, etc

GT-LL5-D-1 from Alish Technology is a slim isolated 2mV/V load cell converter with 10VDC excitation voltage and 4-20mA output.

5 Digit dual input math function isolated transmitter with two 4-20 mA inputs and 4-20 mA output. Functions available: A ± B, A × B, A ÷ B, |A|, √A, and A&B (re-transmission of highest or lowest input signal).

Note: this transmitter requires 8 pin DIN Rail base NTR-221.

Novus' differential temperature controller is designed for solar water heating applications. Two NTC-type temperature sensor inputs and one control output and RS-485 (Modbus RTU). It requires 12 to 30 V power supply.

The TCW242 is an Ethernet control unit with 4 digital inputs, 4 relay outputs, 4 analog inputs and Modbus RTU sensors for up to 24 sensors (registers). 

Din Rail Mount Relay Module with single 0-10Vdc Analog Input and Triple Interlocked Relays, adjustable Setpoints, 24VAC/DC power, contact rating 230VAC at 8A 

DIN rail mount thermostat with J type Thermocouple (J T/C not included). Configurable for a huge range of heating and cooling applications. 230 VAC powered.

DIN rail mount thermostat with K type Thermocouple (K T/C not included). Configurable for a huge range of heating and cooling applications. 230 VAC powered.

DAQ Factory Provides The Tools You Need To Create Your HMI / SCADA Application With Ease

A high-quality range of CE-marked standard pin-out 4PCO 14-pin plug-in relays, nominally rated at 5 Amps/250VAC AC1. The relays benefit from every customer-required option as standard, namely both mechanical and electrical indication via a mechanical flag and a high-intensity LED. DC coil relays also have included within the relay a protection diode fitted across the coil as standard.
The relay comes with a PYF-14BE base.

Fema I4F is an Isolated signal converter for frequency, impulses, RPM speed, and flow signals. Output signal in 4/20mA and 0/10Vdc. Isolated 3 ways.
Configurable to work with NPN, PNP, Pick-up, Namur, mechanical contact, reed contact, and other sensors. Dedicated input to measure frequency from AC voltage up to 600 Vac.
Accepts a wide range of frequency ranges, from 1 Hertz up to 1 MHertz, with a minimum workable signal of 100 milliHertz and resolution of 1 milliHertz.  

We have a service to configure the I4F for you if you require it.

Modbus TCP to Modbus ASCII/RTU converter gateway allows Modbus TCP masters to communicate with serial Modbus slave devices via RS-232/RS-485/RS-485 interfaces.

RK900-10 automatic weather instrument simultaneously measures the atmospheric temperature, atmospheric humidity, air pressure, wind speed, wind direction, and precipitation (more options on special order: solar radiation, Illuminance/UV, dust concentration).

Limited Stock!!!

Modbus TCP to Modbus ASCII/RTU converter gateway allows Modbus TCP masters to communicate with serial Modbus slave devices via RS-232/RS-485/RS-485 interfaces.

M30 Through Beam photo electric sensor switch with 20 metre sensing distance, NPN NO+NC outputs and 10 to 30 VDC Powered. Comes with transmitter and receiver. Choose a 2m cable with a straight or 90 degrees 4 wire M12 connector 

M30 Through Beam photo electric sensor switch with 20 metre sensing distance, NPN NO+NC outputs and 10 to 30 VDC Powered. Comes with transmitter and receiver. Choose a 2m cable with a straight or 90 degrees 4 wire M12 connector 

M30 Retro-Reflective photoelectric sensor with 4 metre sensing distance, NPN NO+NC outputs and 10-30VDC Powered. Choose a 2m cable with a straight or 90 degrees 4 wire M12 connector 

M30 Retro-Reflective photoelectric sensor with 4 metre sensing distance, NPN NO+NC outputs and 10-30VDC Powered. Choose a 2m cable with a straight or 90 degrees 4 wire M12 connector 

M30 Diffused photoelectric sensor with 1 metre sensing distance, NPN NO+NC outputs and 10-30VDC Powered. Choose a 2m cable with a straight or 90 degrees 4 wire M12 connector 

M30 Diffused photoelectric sensor with 1 metre sensing distance, PNP NO+NC outputs and 10-30VDC Powered. Choose a 2m cable with a straight or 90 degrees 4 wire M12 connector