iCDC-25 iLOG Current and Temperature Data Logger

iCDC-25 iLOG Current and Temperature Data Logger

SKU: MED-040

iLOG 0-25mA Current and Temperature Data Logger. Records up to 8 MB of data and stores them in non-volatile flash memory. Battery powered

Micro Edge
  • Manufacturer: Micro Edge
Buy more for less:
1-4items$253.05/ each 
5-9items$227.75/ eachsave10%
10or more items$215.09/ eachsave15%
  • $253.05
Qty:  
In stock(1 item available)

iLog Current Data Logger is low cost, high accuracy, battery powered, stand-alone 25mA current + ambient temperature data logger. The logger records up to 8 megabyte of data and stores them in non-volatile flash memory for later retrieval. Input current signal can be from sensors, transducers, transmitters or any other common current sources. Its on-board temperature channel provides environment monitoring and temperature compensation. Its aluminum enclosure makes it excellent in the harshest industrial environment. 

Plug & Play USB port and versatile custom equation simplify communications and engineering unit conversion. 16-bit ADC makes it well suited for science and laboratory applications where precise and accurate measurements are critical. 

Simply plug the logger to computer's USB port, and the software automatically recognizes it and handles the configuration, downloading, graph viewing and more... 

Features:

  • 16-bit analog-to-digital converter
  • Temperature compensation
  • 8 megabyte memory size
  • Both USB and serial interfaces with auto baud rate of up to 115200 bps
  • Over 12 years of battery life
  • Powerful software for configuration, downloading, plotting, analysis and alarm reporting
  • Configurable alarm control/excitation controls
  • Wide sampling interval selections (20 milliseconds to 12 hours)
  • Rugged aluminum enclosure
    • SKU
      MED-040
    • Weight
      0.28 kg
    • Dimensions (L x W x H)
      17 x 12 x 5 cm

Inputs

  • Connection: Plugable terminal block for one external channels
  • Channels: One external 25mA channel.
  • Resolution: 0.0018%
  • Accuracy: ±0.1% FSR @ 25 °C
  • Load Resistor: 12 Ohms
  • Over-Current Protection: Up to ± 100 mA

Alarms

  • Channel Alarms: Two editable alarm thresholds per channel.
  • Alarm Indicator: On-board LED becomes red when in alarm condition.

On-board Memory

  • Size: 8 Mega bytes (4MB readings).
  • Data Retention: Over 20 years.

Sampling

  • Sampling Interval: 1 second to 12 hours user selectable. (external power supply required if in fast sample mode)
  • Logging Mode: Stop recording or FIFO when memory is full.
  • Logging Activation: Programmable instant, start delay or field push button activation.

Communications

  • Interface: USB (Mini-USB-B) (USB-A-mini USB-B Cable included)
  • AUX(RJ11): for direct TTL level communications
  • Baud Rate: Auto-detect baud rate from 2400 to 115200 bps on both USB and AUX.

Battery

  • Power: Built-in 3.6V Lithium Battery.
  • Battery Life: 12 years based on 1 minute sampling interval in stand-alone mode.

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Customers who viewed this product also bought