HD67668-A1 Ethernet/IP Master / Ethernet - Converter
This product will allow you to connect some EtherNet/IP Slaves (for example a Meters, Switches etc..) with an Ethernet network in order to exchange information between the networks.
This serie of products allows to integrate some EtherNet/IP devices into an Ethernet network.
The HD67668-A1 is an EtherNet/IP Master / Ethernet Converter so you can connect some EtherNet/IP Slaves (for example a Meters, Switches etc..) with an Ethernet network in order to exchange information between the networks.
This converter is typically used when there is the necessity to monitor and control EtherNet/IP devices from a PC: it allows you to develop your own software interface to access to EtherNet/IP system using very simple IP commands.
It is a very useful solution when it is required to simulate a Master inside the network to test a system or some devices without having a real PLC.
Features Include
- Two-directional information between EtherNet/IP bus and Ethernet bus;
- Isolation between Ethernet – Power Supply;
- Mountable on 35mm Rail DIN;
- Wide power supply input range: 8…24V AC or 12…35V DC;
- Wide temperature range: -40°C / 85°C [-40°F / +185°F]
CONFIGURATION:
- You need Compositor SW67668 software on your PC in order to perform the following:
- Define the parameters of EtherNet/IP line;
- Define the parameter of Ethernet line;
- Define the list of EtherNet/IP slaves connected to the converter;
- Update the device.
Ports | 2xEthernet/IP |
PROFINET Protocol | EtherNet/IP Master |
Ethernet Protocol | TCP or UDP |
Data Rates PROFINET | 10/100 Base-T Autosensing |
Data Rates Ethernet | 10/100 Base-T Autosensing |
PROFINET connector | RJ45 |
Ethernet connector | RJ45 |
Power supply | 8…24V AC; 12…35V DC |
Operating temperatur | -40° to +85° (-40°F to +185°F) |
Dimensions | 120x23x107 (DxWxH) |
Weight | 200g approx |
Mechanical fixing | DIN Rail montage |
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.