SS-240VA 500K Pot Input 40A@240V AC Switch with Potentiometer
Phase control solid state relay with 500 kΩ potentiometer input controls up to 40 A and 240 VAC.
It includes the 500 k potentiometer.
The SS-240 VA Solid State Relay from Conch is a panel mounting solid state relay that allows a 500 KΩ potentiometer to be connected across the input. The position of the potentiometer results in Phase Trigger Control of the Load. If the potentiometer is set at 10% then 10% of the cycle is passed. (Warning there is no isolation between the input and output. There is 240 VAC across the potentiometer inputs. The potentiometer must be rated to the load voltage), with outputs rated at 40 A @ 240 VAC. The breakdown voltage is rated at 2500 Vrms. Comes with cover to minimize contact with live voltages (see picture)
It includes the 500 k potentiometer.
- Input Circuit: Potentiometer Resistor 500 KOhm for 240 VAC
- Load Voltage Range: 80-280 VAC
- Non rep. peak voltage: 600 Vp
- Leakage current: 8 mA
- 1 Cycle Surge Current: 400 A
- Operating/Storage Temperature: -20 to 80 °C/-40 to 100°C
- Dimensions: 57(L) x 45(W) x30(H) mm
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.