TYS-240CA 4-20mA Input 40A@240V AC Switch
Phase control solid state relay with 4 to 20 mA input controls up to 40 A and 240 VAC. Built-in Heatsink. DIN Rail Mounted
The TYS-240CA Solid State Relay from Conch is a DIN Rail Mounted solid state relay that allows a 4-20 mA signal to be connected across the input. The level of the 4-20 mA signal results in Phase Trigger Control of the Load. A curve is provided on the datasheet showing the relationship between the input current and the Output Percentage load. The load output is rated at 40 A @ 240 VAC. It provides 2000 Vms opto-isolation between input and output.
Comes with a cover to minimize contact with live voltages and is mounted on a heat sink for heat dissipation.
For 50Hz power frequency, please adjust the ADJ pot to its maximum setting. This will prevent the device from turning on when the input signal is less than 4mA.
- Input Control Range: 4-20 mA
- Load Voltage Range: 90-240 VAC
- Non rep. peak voltage: 600 Vp
- Leakage current: 8 mA
- 1 Cycle Surge Current: 400 A
- Operating Temperature: -10 to 50°C
- Dimensions: 116(L) x 33(W) x 109.50(H) mm
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.