RHT-DM Duct Temp & Humidity Sensors 4-20mA 250mm
RHT-DM Duct Temp & Humidity Sensors 4-20 mA 250 mm
The Relative Humidity and Temperature Transmitters RHT-WM and RHT-DM are microprocessor based instruments that incorporate high accurate and stable sensors whose information is converted to linear 4-20 mA.
Using the digital communication interface TxConfig, the transmitter parameters can be configured to tailor a particular application.
The RHT-WM model is intended for wall mounting. The RHT-DM comes with a probe tip for duct mounting.
RHT-DM (Duct Mount) can be purchased with 150 mm and 250 mm probes
Taking Care with Sensors
The RHT-WM is designed primarily for commercial offices and building where air is relatively clean and condensation does not occur. The calibration of the humidity sensor may be changed if it is exposed to contaminant vapors or extreme humidity and temperature conditions for long time periods. If using in a dusty environment a Sintered Bronze Dust Cover (SKU RHT-030)is recommended
Power supply: 12 to 30 Vdc
Channel isolation: 4-20 mA outputs are isolated from each other
- OUT1 output resolution: 0.006 mA
- OUT2 output resolution: 0.022 mA
Reverse polarity protection: Yes
Cable entrance: Compress fitting PG7
RH channel:
- Accuracy: ±1.5 %RH at 25 °C, from 20 to 80 %RH
- Repeatability: ±1% RH
- Hysteresis: ±1% RH
- Span: any value between 0 and 100% RH or –40 to 100°C for dew point
Temperature channel:
- Accuracy: ±0.5 °C at 25 °C. Maximum ±2 °C from -40 to 80 °C
- Repeatability: ±0.1°C
- Span: between -40 and 120°C
Operating limits:
- Sensor and probe (RHT-DM): -20 to 80 °C, 0 to 100 %RH
- Electronic circuit: -10 to +65 °C, 0 to 95 %RH
Dimensions: 70 x 80 x 35 mm
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.