- Clearance
- Arduino
- CNC
- Communications
- Computer Products
- Controllers
- Data Acquisition
- Data Loggers
- Electrical Switches
- Electrical Terminals-Wiring
- Enclosures
- Industrial IoT
- Large Displays
- Lighting
- Modbus-Bacnet-MBus Products
- Motor Drivers & Controllers
- Motors & Accessories
- Panel Meters
- PLCs & HMIs
- Power Supplies
- Prototyping
- Relays & Relay Cards
- Security
- Sensors
- 1 Wire
- Accelerometers
- Capacitive Proximity
- Chemical
- Compass
- Current-Voltage
- Float Switches
- Flow
- Gas
- Hall Effect
- Inclinometers
- Inductive Proximity
- Length & Distance
- Light & Colour
- Limit & Foot Switches
- Liquid Level
- Load Cells
- PhotoElectric Switches
- Pressure Transducers
- Smartphone Based
- Temperature RTD and T/C
- Temperature Other
- Temperature & Humidity
- Ultrasonic
- VOC - Air Quality
- Signal Conditioners
- Software
- Test Equipment
- Timers
- Weather
2609 products found
Sort by:Recommended
LabJack U12 USB Data Acquisition Module
SKU:LAJ-001The LabJack U12 is the simplest member of the family, with 12 analog inputs (12 bit ±10 VDC, programmable gain amplifier), 20 digital IO, 2 voltage outputs and USB interface.
CB25 - Labjack Terminal Board for Digital I/O
SKU:LAJ-002Screw terminal connections, with short-circuit and overvoltage protection, for the extra 16 digital I/O on the LabJack U12.
PyroSigma Non Contact Temperature Sensor with Collar & Mounting Bracket.
SKU:OTS-001CMiniature Pyrometer with Built-in Display, 0-5V analog output, and alarm output. Fully configurable using the front panel buttons. 0-1000 Deg C.
Last unit!!!Stainless Steel Temperature Probe
SKU:LAJ-006High-level linear voltage output and high accuracy. Operating temperature range from 0 to +150 °C.
LabJack U3-LV USB Data Acquisition Module
SKU:LAJ-021The most economical member of the LabJack family, the U3-LV has 16 flexible I/O (digital input, digital output, 12 bit 0 to 3.6 VDC analog input), 2 voltage outputs and USB interface.
LabJack U3-HV USB Data Acquisition Module
SKU:LAJ-022The most economical member of the LabJack family, the U3-HV has 12 flexible I/O (digital input, digital output, 12 bit 0 to 3.6 VDC analog input), 4 HV analog inputs (12 bit -10 to 20 VDC), 2 voltage outputs and USB interface.
CB15 - LabJack Terminal Board
SKU:LAJ-014Provides convenient screw terminal access to 12 digital I/O available on a DB15 connector.
LJTick-Divider 4 Unipolar
SKU:LAJ-030A signal conditioning module that divides 2 single-ended uni-polar channels of 0 to 10 V analog signals down to 0 to 2.5 V signals. Voutput = Vinput/4
LJTick-InAmp
SKU:LAJ-031Plugs directly into the standard screw terminal block found on newer U3/U6/UE9/T4/T7. On board switch allows 5 various gain settings, one of them being custom.
LJTick-RelayDriver (LJTRD)
SKU:LAJ-032Allows 2 digital I/O lines on a U3, U6 and UE9 to each control a relay or other moderate load. Each has a switch to ground (i.e open-collector) that can hold off up to 50 V and can sink up to 200 mA.
LJTick-CurrentShunt
SKU:LAJ-034A signal conditioning module designed to convert two 4 to 20 mA current loop signals into voltage signals that vary from 0.472 to 2.360 V.
LJTick-Dac - Digital to Analog Converter
SKU:LAJ-035LJTick-DAC is an analog output expansion module that provides a pair of 14-bit analog outputs with a range of ±10 V.
CB37 - LabJack U6 and T7 Terminal Board
SKU:LAJ-012Plugs directly into the bottom of a LabJack U6, UE9 or T7 to give screw terminal access to extra IO signals.
LabJack U6 Data Acquisition Module
SKU:LAJ-041LabJack U6 USB IO module with 14 analog inputs (up to 16 bit resolution), 2 analog outputs and 20 digital IO.
LabJack U6-Pro Data Acquisition Module
SKU:LAJ-042LabJack U6-Pro USB IO module with 14 analog inputs (up to 22 bit resolution), 2 analog outputs and 20 digital IO.
ModbusView TCP Software
SKU:OCS-011ModbusView TCP software for simulating Modbus ASCII, RTU, and TCP masters and slaves.
The license takes a day or 2 to be emailed to you.
DPDT DIN Mount Relay 12VDC
SKU:RLY-00312 VDC Coil, 10 A contact DPDT relay with a screw-terminal base that can be DIN rail or panel mounted.
DPDT DIN Mount Relay 24VDC
SKU:RLY-00424 VDC Coil, 10 A contact DPDT relay with a screw-terminal base that can be DIN rail or panel mounted.
DPDT DIN Mount Relay 240VAC
SKU:RLY-010240 VAC Coil, 10 A contact DPDT relay with a screw-terminal base that can be DIN rail or panel mounted.
30 A DPDT Panel Mount Relay, 240 VAC
SKU:RLY-007DPDT panel mount relay with 240 VAC coil. 30 A, 277 VAC contacts with spade terminals.
Two 12VDC Relay Card
SKU:RLC-122Two channel relay card with flexible inputs. Each relay is rated to 7A at 240VAC, 10A at 28VDC. Operates from a 12VDC supply.
Four 12VDC Relay Card
SKU:RLC-124Four channel relay card with flexible inputs. Each relay is rated to 7A at 240VAC, 10A at 28VDC. Operates from a 12VDC supply.