The AID100 is special for monitoring 0～50A current status. if detected current normal or loss then will output a TTL alarm signal. It is an industrial class, high reliability, low-power consumption, high stability and high precision digital transducer.

HYBS-20-01 Float Switch for Submersible Pump Automatic Switch Float Switch Bilge Water Level Automatic Controller

The PRM is an extension module with 4 Analog Inputs and 2 Analog Outputs designed to expand the I/O-points of the PR200 Programmable Relay. Power 24 VDC

The signal converter from FEMA has an input of 4-20mADC current. It can output -10VDC to 10VDC. Galvanic isolation between input, output and power circuits. The unit is powered by 24VDC.

The BRT LB02G (Upgraded New Version) is a low cost Signal Generator with rechargeable lithium battery and selectable 0-20mA or 0-10V output 

NOVUS, proudly releases our N20K48 controller family. Its new and consistent concept is based on a compact, powerful core controller plus a growing family of micromodules that can be plugged in. The base unit has the USB Bluetooth Process controller, 1 relay + pulse out, 48x48 mm 

RK120-01 Combined Wind Speed & Direction Sensor with 4-20 mA outputs. 12~24 VDC powered

Dual shaft NEMA 24, 2 phase bipolar stepper motor with 3.0 N.m of holding torque. Rated at 5 A phase current, weighing 1.3 kg with 85 mm body length and 8 mm shaft diameter.

Cover unused holes in cabinets and escutcheon doors. Threaded nut with o-ring gasket. Gray in color

60m 4-Conductor Extension Cable for Davis weather station.

Economic and efficient temperature controller, with PID, Pulse Output, 3 Relay outputs, RS485 Modbus interface, USB interface and many other features. 230 VAC powered. Auto tuning and Loop Break Detection.

Economic and efficient temperature controller, with PID, Pulse Output, 3 Relay outputs, RS485 Modbus interface, USB interface and many other features. 24 VDC powered. Auto tuning and Loop Break Detection.

Easy to use pipe wind speed sensor with 4 to 20 mA signal output and 1.5 meter cable.

The RK500-04 Dissolved Oxygen(DO) Sensor is used to measure the oxygen level in water. An excelent water quality sensor.

The RK500-02 PH Sensor is used to measure the PH level in water or soil. An excelent water/soil quality sensor.

Fema I4L is an isolated signal converter for load cell signals and millivolts. Provides +5 Vdc excitation voltage to power the load cell, and ‘sense’ function to compensate for excitation voltage variations. Accepts direct connection of 1, 2, 3 or up to 4 load cells (typical 350 Ohms load cells). We have a service to configure the I4L for you if you require it.

72mm x 72mm, 6 Digit up/down LCD Counter/Timer.

RK300-02 Outdoor Dust Sensor using laser scattering principle to detect the existence of dust particle concentration in the air. Can detect 1.0μm particles with good consistency and stability. 

This model only detects atmospheric particulate matter (PM) that have a diameter of less than 2.5 micrometers (PM2.5). Other model/combinations are available to detect PM1.0 and PM10.

Full model:  RK300-02-B-B-B-C-2000

Fema I4P is an Isolated signal converter for process, temperatures, resistances and potentiometers. Output signal in 4/20mA and 0/10Vdc. Isolated 3 ways. We have a service to configure the I4L for you if you require it.

CG-AO ClickNGo Module has 1 current analog output (0-20 and 4-20 mA) and was designed to work as an expansion module for NOVUS line of modular controllers such as N20K48.

CG-3DI ClickNGo module has 3 digital inputs and was designed to work as an expansion module for NOVUS line of modular controllers such as N20K48.

Newly released the Fema I3D accepts process signals in 4/20 mA and 0/10 Vdc, provides excitation voltage if needed. Dual 4-20mA outputs. Isolated 4 ways between power, input signal, output 1 and output 2.  We have a service to configure the I3D for you if you require it.

CG-3DO ClickNGo Module has 3 pulse voltage outputs (+5V) and was designed to work as an expansion module for NOVUS line of modular controllers such as N20K48.

CG-2R5 ClickNGo Module has 2 x 5A relay outputs and was designed to work as an expansion module for NOVUS line of modular controllers such as N20K48.