FL45 RJ45 Ethernet Surge Protection 10/100/1000M
TOD-0221 FL45 RJ45 Ethernet Surge Protection Suitable for 10Base-T/100Base-T/100Base-T standard
IEC61000-4-5 and ITU-TK20&K21 are the recognized standards for top quality surge protectors, FL45-1000 made by the high response surge arresters, the advantage allow clamping voltage and low loss against high speed signal, because it had a low capacitance. Designed to protect data communication lines in local and wide area networks up to 1000Base-TX transmission speeds.
FL45-1000 uses current limiting and voltage clamping with discharge to ground techniques. When a data line surge is present, the FL45-1000 protection is activated and the lightning energy is discharged to ground, and the high surge voltage is clamped to low level, so your devices is protected.
- IEC6 1000-4-5 and ITU-TK20&K21
- The high response surge arresters
- Clamping voltage and low loss against high speed signal
- Designed by the theory of current limited and voltage clamped, discharged to ground
- Support 1 Gigabit Ethernet signal input and output, and provide 3 kA surge protection
- Applicable rate up to 1000 bps
- Adopt multilevel protective circuit with quick response and low residual voltage output
- Metal housing, great sealing, and resistant to dust and corrosion
- No power supply needed, No consumption
- Standard:10Base-T/100Base-TX/1000Base-TX
- Standard: 10Base-T/100Base-TX/1000Base-TX standard
- 10/100/1000M signal: IEC6100-4-5 and ITU-TK20&21
- Nominal discharge current(In): 5 KA(8/20?S)
- Working voltage: 0-5 V
- Limit voltage: ~40 V
- Apply Baud rate: 1000 Mbps
- Connector: RJ45 (F)
- The line of protection: 4 lines (1, 2, 3, 6)
- Insert consumption: ~0.5 dB
- Delay time: ~1 ns
- Working temperature:-20 to 60°C
- Storage temperature:-25 to 85°C
- Humidity: Relative humidity 5% to 95%
- Dimensions: L×W×H: 72×42×25 mm
Dispatch
In-stock orders are dispatched within 2 business days.
Shipping options
We deliver across Australia and internationally by any of the following methods:
- Australia Post Express
- Australia Post Parcel Post
- DHL
- FedEx (only international)
- Freight account. We'll email packaging dimensions when the shipment is ready to be book.
*Transit times vary depending on the shipping method and destination.
Store Pickup - Carrum Downs, Victoria, 3201
Order before 11am to collect after 2pm the same day. Mon–Fri, 9am–5pm, excludes public holidays.
RETURNS
How to return an item Contact us before sending anything back. Email info@oceancontrols.com.au or call +61 3 9708 2390. We'll confirm eligibility and guide you to the return process.
Return window 14 days from dispatch date.
Condition required Items must be unused and in original packaging, including all documentation and manuals.
Restocking fee A 20% restocking fee applies to all accepted returns. Return shipping costs are the customer's responsibility.
Non-returnable items
- Custom-made or specially imported products
- Software licences (some software have trial versions available)
- Items not in original, as-new condition
WARRANTY
How to make a warranty claim Before returning anything, please contact us. Our engineers can often resolve the issue remotely. If a return is required, our team will provide you with a warranty form to include with the goods.
What's covered Defects in materials and workmanship under normal use and correct installation.
What's not covered The warranty does not cover damage or failures caused by factors outside our control, including incorrect installation, unauthorised alterations or modifications, or any installation or use not recommended by the manufacturer.
Standard warranty All products carry a 12-month warranty from the date of purchase unless stated otherwise.
Extended warranty
- Labjack: 5 Years
- Atop: 5 Years
- MeanWell: 3 Years
- Teracom: 3 Years
- Novus: 3 Years
