TCW122B-WD IP watchdog monitoring module

TCW122B-WD IP watchdog monitoring module

SKU: TCC-004

TCW122B-WD is an IP watchdog monitoring module, specially designed for a failsafe monitor system.

You can power this unit with our power plug  PLP-003

Teracom
  • Manufacturer: Teracom
Buy more for less:
1-4items$128.67/ each 
5-9items$115.80/ eachsave10%
  • $128.67
Qty:  
In stock(5 items available)

TCW122B-WD is an IP watchdog monitoring module, specially designed for a failsafe monitor system. The module controls the functionality of devices or networks by transmitting or receiving respectively ICMP echo request or ICMP echo reply. The appropriate relay is activated if there isn’t an ICMP echo (ping) for certain time. This can restart the monitored device or network switch.

TCW122B-WD has two digital and two analog inputs. It’s two relays have normally open and normally closed contacts. For every of monitored parameters – temperature, humidity, analog voltage and status of digital input, SNMP trap can be sent on certain conditions. The relays can be activated remotely (WEB and/or SNMP) or automatically from presence/absence of ping.

  • Password protected web based configuration and control;
  • 1-Wire interface for up to 2 sensors;
  • 2 relay outputs with normally open and normally closed contacts;
  • 2 analog inputs with 0 to 60 VDC range;
  • 2 digital inputs with “dry contact†or “logic level†mode;
  • SNMP v.1 support;
  • SNMP trap messages sending under certain conditions;
  • VLAN and MAC address filtering;
  • Remote FTP firmware update.
  • Watchdog monitoring of small and medium networks;
  • Monitoring of temperature and humidity in server rooms;
  • Control and management of ISP networks;
  • Remote control of electric devices.
    • SKU
      TCC-004
    • Weight
      0.2 kg
    • Dimensions (L x W x H)
      13 x 10 x 4 cm
  • Power Supply: 10 - 14 VDC
  • Current draw: 200 mA @ 12vdc
  • Digital Inputs: X2 (dry contact/logic level), high 5.5 V max 2.5 V min, low 0.8 V max  
  • Analogue Input: 0- 60 VDC
  • Relay output: 3 A @ 24 VDC/ 30 VAC (resistive)
  • Operating temperature range: -20 to 55° C
  • Storage temperature range: -25 to 60°C
  • Operating relative humidity range: 5 to 85% (non-condensing)
  • Transfer rate: 10 Mb/s
  • Dimensions: 107*72*32 mm
  • Weight: 110 g

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Customers who viewed this product also bought