Conductive Probe Level Control Relay 230VAC

Conductive Probe Level Control Relay 230VAC

SKU: NTC-001

The MOD-W-1 is a DIN Rail mount liquid level control relay. It features adjustable sensitivity and time delay from 0.1 to 10 sec. SPCO output with selectable pump up or pump down modes as well as relay proving function.

Foxtam Controls
  • Manufacturer: Foxtam Controls
Buy more for less:
1-4items$68.27/ each 
5-9items$61.44/ eachsave10%
10or more items$58.03/ eachsave15%
  • $68.27
In stock(3 items available)

The MOD-W-1 uses a two or three prong conductive probe to control the level of liquid in a tank or other storage container.

The unit is a transformer based conductive probe level control relay, hence available in dedicated AC voltages only. The sensitivity is adjustable from 2 to 100 kΩ, via the on-board potentiometer. Another potentiometer enables the user to adjust the delay on the tripping timer from 0.1 to 10 secs to prevent false activation from liquid movement.The probe supply from the MOD-W1 is an isolated 20VAC @ 2mA. The MOD-W1 will work successfully with cables up to 200m from the probes.

It also features an eight-way function switch (designated A to H) that allows user to switch between "pump up" & "pump down" modes along with a relay proving function "permanent on" or "permanent off". The switch will also determine how the adjustable time delay will function.

The function positions are as follow:

  • A: Pump up, delay on energisation & de-energisation
  • B: Pump down, delay on energisation & de-energisation
  • C: Pump up, delay on energisation
  • D: Pump down, delay on energisation
  • E: Pump up, delay on de-energisation
  • F: Pump down, delay on de-energisation
  • G: Relay proving, permanent on
  • H: Relay proving, permanent off

Function explanation:

  • Regulation of two levels - pump down mode: The relay energises when the high level probe is reached and de-energises when the level falls below the low level probe.
  • Regulation of two levels - pump up mode:  The relay de-energises when the high level probe is reached and energises when the level falls below the low level probe.
  • Regulation of one level - pump down mode: Connect the maximum and the common terminals together. In this case, only a single probe is used and the relay operates when the probe is immersed.

A common reference is always required, if the vessel/tank is conductive the chassis of the tank or vessel will suffice. If the vessel/tank is not conductive a third probe is required to act as the comment reference, which has our SKU: NTS-050

Please Note: Selection of pump up mode reverses the relay 

Wiring Diagram:




Supply voltage:230 VAC
Isolation:2.5 kV @50 Hz
Power consumption:3 VA
Sensitivity Range:Adjustable 2 to 100 kΩ
Delay on tripping time:Adjustable 0.1 to 10 sec
Probe Supply:20 VAC
Max Probe Current:2 mA

SPCO Output:8 A @250 VAC
Max Breaking Capacity:2 kVA
Mechanical life:30 Million ops
Electrical life:200 K ops at max rated load

Operating temperature:-20 to 40 °C
Storage temperature:-20 to 60 °C
Max cable size:2.5 mm
CE marked:Yes
In accordance with:EN61000-6-1: 2007
EN61000-6-3: 2007
EN61010-1: 2002
Housing material:Thermo plastic ABS (DIN7728)
Extinguishable according to UL94VO
Manufacturer's P/N:MOD-W-1

    • SKU
    • Weight
      0.02 kg
    • Dimensions (L x W x H)
      6.5 x 7.8 x 0.6 cm

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Customers who viewed this product also bought