Foxtam Controls

DIN-rail mount cyclic timer with configurable on and off times. Features selectable "pulse first" or "pause first" for initial timing function. 4PCO relay output, selectable multi-time range from 1 s to 100 days.

DIN-rail mount, SPCO, single time range timer designed to reset and restart a control system when its voltage dips below 80% of the nominal supply voltage.

An 11 pin plug in engine start attempt relay for use in starting combustion engines connected to generators. 9 to 30 VDC auxiliary power. Features LED indication, separate start and alarm relay output.

DIN rail mount, multi-voltage range from 12 to 250 VAC/DC changeover (DPCO) latching relay, 16 A maximum switching current. Separate toggle, set and reset inputs.

DIN rail mount, multi-voltage range from 12 to 250 VAC/DC changeover (SPCO) latching relay, 16 A maximum switching current. Separate toggle, set and reset inputs.

DIN rail mount, SPCO contact type power relays have tri-voltage relay coil of 24 VAC/DC, 110 VAC, 230 VAC with 16 A maximum switching current @ 250 VAC.

DIN rail mount, 3PCO contact type power relays have tri-voltage relay coil of 24 VAC/DC, 110 VAC, 230 VAC with 16 A maximum switching current @ 250 VAC.

DIN-rail mount, multi-function timer with 4PCO relay output rated at 8 A/ 250 VAC. 12 to 240 VAC or VDC powered. Eight selectable timing modes and an adjustable time period from 0.1 second to 10 days.

This DIN rail mount timer is capable of switching a large load with 5 selectable pre-programmed time ranges from 1 day to 1 month. 4PCO heavy duty relay contacts. 12 to 250 VAC/DC powered.

The YWA10 is a relay alarm module that features 10 inputs, 2 separate relay outputs. Accepts 24 VAC/DC input signals and can be DIN rail mounted.

DIN rail mount, 3-wire system phase failure relays with independent over & under voltage control and optional adjustable time delay sequence (0.1 to 10 sec). SPCO relay output rated to 10 A @ 250 VAC. These are transformers based, thus it will ignore transients and harmonic distortions.

DIN rail mount, 4-wire system phase failure relays with independent over & under voltage control and optional adjustable time delay sequence (0.1 to 10 sec). SPCO relay output rated to 10 A @250 VAC. These are transformer based, thus it will ignore transients and harmonic distortions.

The MOD-W-1 is a DIN Rail mount liquid level control relay. It features adjustable sensitivity and time delay from 0.1 to 10 sec. SPCO output with selectable pump up or pump down modes as well as relay proving function.

3×1 m long conductive level probes come with probe holder.

Din rail mounted under-speed relay suitable for all kinds of machinery to detect loss of speed and pulse continuity. It accepts NAMUR proximity switch, PNP sensor, or clean contact input signals. The period between pulses is adjustable from 0.5 seconds to 21 mins

4 to 20 mA loop powered 24 VDC with primary current of 100A. Accuracy class 1

Slim isolated selectable analog input signals with selectable single analog output. It features on-board DIP switches that enable the user to select their preferred input/output signal.

Slim isolated signal converter with dual output converts a single, selectable analog input signal to dual analog outputs. The input signal type and each output signal type can be configured with on-board DIP switches.

4 to 20mA loop powered 24VDC with primary current of 250A. Accuracy class 1

The 11WA8 is a plug in alarm integrator that has 8 inputs and 1 relay output. The output is active when any one of the inputs is active (logical OR function) It accepts 24 VAC/DC input signals.

0.1-10 VDC adjustable setpoint trip relay with two independent outputs. 2% hysteresis at each setpoint. SPCO relay outputs rated to 10 A @ 250 VAC. 24 VDC powered and DIN rail mount.

1 to 20 mA adjustable setpoint trip relay with two independent outputs. 2% hysteresis at each setpoint. SPCO relay outputs rated to 10 A @ 250 VAC. 24 VDC powered and DIN rail mount.

SMH-TC 12VDC Signal Line Surge Arrester. Suitable for 0-10 V signals.

LAST UNITS!!
No Backorders available.

The MOD-W-1 is a DIN Rail mount liquid level control relay powered from 24 VAC. It features adjustable sensitivity and time delay from 0.1 to 10 sec. SPCO output with selectable pump up or pump down modes as well as relay proving function.