N1050-PRRR-485 PID Temperature Controller, 230 Vac Powered
N1050-PRRR-230 VAC Compact sized PID temperature controller with vivid LCD display, auto tuning PID, soft start and ramp and soak. Input accepts thermocouples J, K, T and Pt100 sensors. Pulse and 3 Relay outputs. Fitted with RS485 Modbus connection
N1050 is an advanced high performance PID temperature controller featuring a vivid LCD display in a modern design package. It combines the proven robustness of NOVUS PID algorithm with a large and bright easy-to-read multicolor 11-segment LCD display with alphanumeric mnemonics and crystal clear status signaling.
Besides the PID auto-tuning capability, N1050 outputs PWM control mode through pulse or relay. Fitted with 3 output relays which can be selected for PWM Control or alarms. It also features 5 ramp-and-soak profile programs, soft start output and timer function which complement the advanced features of the controller. With password protected, all parameters are configurable by the display menu, via USB port or optional RS485 Modbus interface.
Easy to install and maintain due to its detachable connector, N1050 offers the lowest power consumption in the market. Housed in anti-flame material, it has 48x48 mm (DIN 1/16) format and low profile front panel. Suitable for hostile environments, it complies with standard EMC regulations, providing robustness and reliability including untapped temperature applications.
Software can be downloaded from Novus Automation website
- Quick Tune software can be used to configure the N1050. Connects to USB port
- Field Chart can be used to monitor and log the operation of the N1050. Connects to USB port or RS485 port
Power supply: 100-240 Vdc/ac
Power Consumption: 6 VA
Sensor input:
- J, K, T, thermocouples
- Pt100 RTD
Internal Resolution: 15 bit (32767 levels)
Display: LCD type, alphanumeric with 11 segments.
Display Resolution: 12,000 levels (from -1999 to 9999)
Input Rate: Up to 10 per second
Accuracy (J, K, T thermocouples): 0.25 % of span ±1 °C
Accuracy (PT100): 0.2 % of span
PID Features: PWM, Auto tune
Control Action: 1 Loop (Heat or Cool)
Output Control: 1 Pulse and 3 Relays
Special Functions: Soft-Start, PID Loop Break, Ramp and Soak event, 2 Alarms (7 alarm types) and Timer Function
Configuration: Software NOVUS NConfig, via USB (micro-B type)
Communication protocol: RS-485 Modbus RTU (Optional)
Input Impedance (PT100 and thermocouples): > 10 MΩ
PT100 Excitation Current: 170 µA
Outputs:
Output 1: Voltage pulse 5 V, 25 mA
Output 2 and 3: SPST relay, 240 VAC, 1.5 A
Output 4: SPDT relay, 240 VAC, 3 A
Ramp & Soak: 5 Programs, 4 Segments
Programmable PWM cycle: From 0.5 seconds to 100 seconds
Operating environment: 0 to 50 ºC,
Relative humidity: 80 % RH (For temperature more than 30°C, reduce 3% for each °C)
Front panel: IP65, polycarbonate UL94 V-2
Enclosure: IP20, polycarbonate UL94 V-2
Dimension: 48 x 48 x 80 mm
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.