AXBB-E Ethernet Motion Controller And Breakout Board Combined Controller
Combine Ethernet Motion Controller and Breakout Board in a single module. Can control up to 6-axes with Mach3, Mach4 or UCCNC software with onboard I/Os. Up to 400kHz step frequency. The controller can be connected to an additional Breakout Board to extend the number of I/Os.
Note: The AXBB-E requires 2x power supplies - 1x 5VDC and 1x 12-24VDC.
The AXBB-E is an Ethernet Motion Controller and Breakout Board combination module. It can communicate with a computer via Ethernet direct connection or via a router or network switch.
The controller can be used to control machine tools with stepper or servo motor controls using step and direction signals and has a maximum stepping frequency of 400kHz. The controller can control up to 6 axes. Althought there are only 8 dedicated step and directions signals wired out on the board (which supports up to 4 axes), the I/Os on the software side are freely configurable to any pins - making it possible to use all 6 axes if required.
For the I/Os, the controller includes:
- 8x non-isolated outputs to be used as step and direction signals.
- 8x isolated outputs to drive relays, laser controller or any device that require isolation. 24VDC capable
- 6x isolated inputs for sensors, switches and pushbuttons. 24VDC capable.
- 1x safety charge pump circuit with isolated output.
- 2x analog input channels which can work with externally connected potentiometer (recommended full scale resistance 1k - 10kΩ). These signals can be used to control feedrate override and spindle speed ovveride in the software.
- 1x analog output channel with 0-5V or 0-10V (jumper selectable). This signal can be used to control speed of spindle motor with a VFD
- 1x IDC26 female port which can be used to connect additional Parallel Port compatible breakout board to extend the number of I/Os.
Important: The AXBB-E requires 2x power supplies:
- 1x 5VDC (at least 500mA) digital power supply for internal logic, the non-isolated I/Os, analog ports and IDC26 extention port
- 1x 12-24VDC power supply for external devices and components connected to isolated I/Os.
- 2x Power supplies: 5V 500mA + 12-24V.
- Isolated I/Os are 24VDC capable.
- 8x optically isolated high speed N-channel power mosfet transistor outputs. Maximum 500mA at 10Mbit/s.
- 8x non-isolated buffered TTL outputs for step/dir signals, laser driver etc. Maximum 20mA with 0/5V voltage level.
- 6 high speed optoisolator inputs. Accepts 10-30V input with internal series 2.2kΩ resistor. Max speed 10Mbit/s.
- Isolated charge pump output with power N-channel mosfet transistor.
- 1 IDC26 non-isolated extension port with standard Parallel Port pinout (12 outputs and 5 inputs).
- LED indicators.
Dispatch
In-stock orders are dispatched within 2 business days.
Shipping options
We deliver across Australia and internationally by any of the following methods:
- Australia Post Express
- Australia Post Parcel Post
- DHL
- FedEx (only international)
- Freight account. We'll email packaging dimensions when the shipment is ready to be book.
*Transit times vary depending on the shipping method and destination.
Store Pickup - Carrum Downs, Victoria, 3201
Order before 11am to collect after 2pm the same day. Mon–Fri, 9am–5pm, excludes public holidays.
RETURNS
How to return an item Contact us before sending anything back. Email info@oceancontrols.com.au or call +61 3 9708 2390. We'll confirm eligibility and guide you to the return process.
Return window 14 days from dispatch date.
Condition required Items must be unused and in original packaging, including all documentation and manuals.
Restocking fee A 20% restocking fee applies to all accepted returns. Return shipping costs are the customer's responsibility.
Non-returnable items
- Custom-made or specially imported products
- Software licences (some software have trial versions available)
- Items not in original, as-new condition
WARRANTY
How to make a warranty claim Before returning anything, please contact us. Our engineers can often resolve the issue remotely. If a return is required, our team will provide you with a warranty form to include with the goods.
What's covered Defects in materials and workmanship under normal use and correct installation.
What's not covered The warranty does not cover damage or failures caused by factors outside our control, including incorrect installation, unauthorised alterations or modifications, or any installation or use not recommended by the manufacturer.
Standard warranty All products carry a 12-month warranty from the date of purchase unless stated otherwise.
Extended warranty
- Labjack: 5 Years
- Atop: 5 Years
- MeanWell: 3 Years
- Teracom: 3 Years
- Novus: 3 Years
