FOXTAM 14 PIN 4PCO, 5 AMP RATED RELAYS
A high-quality range of CE-marked standard pin-out 4PCO 14-pin plug-in relays, nominally rated at 5 Amps/250VAC AC1. The relays benefit from every customer-required option as standard, namely both mechanical and electrical indication via a mechanical flag and a high-intensity LED. DC coil relays also have included within the relay a protection diode fitted across the coil as standard.
The relay comes with a PYF-14BE base.
A high-quality range of CE-marked standard pin-out 4PCO 14-pin plug-in relays, nominally rated at 5Amps/250VAC AC1. The relays benefit from every customer-required option as standard, namely both mechanical and electrical indication via a mechanical flag and a high-intensity LED. DC coil relays also have included within the relay a protection diode fitted across the coil as standard.
The relays can be manually tested by a momentary action push button, a lever can then be twisted to give a locking facility. To differentiate between AC and DC coils in the same installation the push button is colored red for AC coils and blue for DC coils. Available coil voltages are 12VDC, 24VDC, 24VAC, 110VAC and 230VAC. Clearly marked on the relay case are the connection details and the CE mark.
The FRP3145 relays are also available as an option and stocked with 5 microns of gold plating for low-level switching applications.
The relay comes with a PYF-14BE base.
ABOUT THE BASE:
“High-sided” 14-pin sockets with tunnel clamps. A triple deck version, the PYF-14BE/3 allows segregation of voltages, coil terminals being on one side with two A2 terminals. All changeover terminals are on the opposite side. Both socket types have a removable marker tab and screwdriver release tab. Retaining clips are also available for both versions, part number MS35
IMPORTANT NOTE: With regards to coil connection on DC coil relays which have both a protection diode and LED fitted as standard, coil polarity matters (+A1, 13) (-A2, 14).
ORDERING INFORMATION:
FRP3145/12VDC NTR-0030
FRP3145/24VDC NTR-0031
FRP3145/24VAC NTR-0032
FRP3145/230VAC NTR-0033
FRP3145/110VAC (Upon request)
FRP3145/GP/12VDC (Gold plated contacts) (Upon request)
FRP3145/GP/24VDC (Gold plated contacts) (Upon request)
FRP3145/GP/24VAC (Gold plated contacts) (Upon request)
FRP3145/GP/110VAC (Gold plated contacts) (Upon request)
FRP3145/GP/230VAC (Gold plated contacts) (Upon request)
- Coil Voltage12VDC, 24VDC, 24VAC, 230VAC
| GENERAL | COIL | CONTACT | |||||||||||
Rated Power Pull-In Max: DC1.1W AC 2VA Max Coil Temperature: 155°C Test voltage(1min.) contact-coil: ≥ 2kVrms' 50Hz Contact-contact: ≥1kVrms' 50Hz Between-contact 4CO: ≥ 1kVrms' 50Hz Operate time at Un: ≤25 ms Release time: ≤ 25 ms Insulation resistance (500VDC): 100 MΩ Vibration resistance (10-55Hz): Amplitude width 1.5mm Shock endurance: 1000 m/S2 Min Ambient temperature for operating: -25ºC to + 55ºC Mounting position: As desired Relay weight: 35g |
Drop out voltage DC 10% min Pull in voltage DC 80% max Drop out voltage AC 30% min Pull in voltage AC 80% max | Contact form: 4PCO Contact material: AgSnO2 Option with 5 microns of gold plating Rated current: 5A 250VAC AC1 / 30VDC Max. operating voltage: 250VAC, 110 VDC Max. Switching power: 600VA, 150W Max. operating duty: 360 operat./h at max rated load 18000 operat./h at min. load Mechanical life: 107 operations (no load operation) Electrical life: 105 operations at max rated resistive load | |||||||||||
DIMENSIONS:
Relay: | Base: |
PERFORMANCE GRAPHS:
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
