SPCO Wafer Style 6mm Wide Relay Module 24VAC/DC
6 mm wide complete package of socket and relay combined, the base features an integral LED indicator and a relay retaining clip. SPCO contact rated 6 A / 250 VAC AC1
A genuine SPCO mechanical relay package the width of a terminal at only 6 mm wide is the ultimate solution when space is limited and a high packing density is required, in fact in certain applications use the product as a combined terminal and relay saving on even more space. The product is supplied as a complete package of socket and relay combined, the base features an integral LED indicator and a relay retaining clip that also acts as the relay ejector if the need to remove the relay arises. Whilst being the ultimate in space saving the relay has a switching capability of 6 Amps / 250 VAC AC1 and also benefits from a low coil consumption.
A dedicated 9 VDC relay module is available for use in the BMS sector where 0-10 VDC signals are used and a digital output is required. With a pull in voltage of 7.5 VDC and a release voltage of 4 VDC, along with a low power consumption of circa 160 mW (including the LED), this makes these modules an attractive alternative as a “BMS SRMV” relay.
The socket element is more than a socket, it is an electronic device dropping a voltage over a range and also providing a LED indicator. The socket is an equal component in the assembly as the relay. For example, a 240 VAC supply does not utilise a 240 VAC coil relay, a 60 VDC relay is used. This is why this product is only sold as a complete made up assembly.
An optional 20 way jumper bar comb is available to common up negatives or 0V’s, also available as an accessory is a strip of 16 marker tags.
Also of note, is that 12 V, 24 V and 48 V coils can be either AC or DC, same relay.
- Coil: 24 VAC/DC 12 mA
- Contact type: SPCO
- Contact rating: 6 Amps / 250 VAC AC1
- Contact material: AgNi
- Operate time: 8 ms max
- Release time: 4 ms max
- Electrical life: 30000 ops (at full load)
- Mechanical life: 10 000000 ops
- Insulation resistance: 1000 MΩ
- Insulation: Coil to contacts: 4 kVAC 1 min, Open contacts: 1 kVAC 1 min
- Ambient temperature: -40°C to +55°C
- CE marked: Yes
- VDE approved & marked: Yes
- UL approved & marked: Yes
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.