Next product

Digirail OEE Ethernet

The DigiRail OEE is the ideal tool to monitor and examine the performance of your production lines. It reads the sensors that monitor the operation of machines, devices or processes and determine operation time.

Quantity	ex GST	incl GST	Saving
1-4 items	$156.76 / each	N/A
5-9 items	$141.08 / each	N/A	save 10%
10 or more items	$133.24 / each	N/A	save 15%

Every company is constantly searching for efficiency, by optimizing resources and increasing productivity without sacrificing quality. The OEE (acronym for Overall Equipment Effectiveness) is an indicator used to measure performance in the industry. It is a value that points out how much the company uses its machines, labor and materials in production, helping to improve processes, identify losses and increase equipment productivity.

The DigiRail OEE is the ideal tool to read the sensors that monitor the operation of machines, devices or processes. Among its many applications, this multi input module allows you to count operation time and downtime and the amount of approved and rejected parts, signal the need for preventive or corrective maintenance or monitor operating conditions in general.

The device has 6 digital inputs, 2 analog inputs and 2 digital outputs, RS485 interface, USB interface, Wi-Fi or Ethernet communication interface and is compatible with the main clouds on the market. In addition, it can be integrated with MES, SCADA and ERP system

Native compatibility with main cloud providers. Provided with secure MQTT protocol, DigiRail OEE transmits data natively to Google Cloud, Microsoft Azure, Amazon AWS, NOVUS Cloud, or any other compatible IoT cloud platform.

NXperience PC Software:

NXperience software is the main tool for configuration and data download of Digirail OEE. NXperience software provides a user-friendly configuration interface, allowing input simulation and output forcing, locally through USB port and remotely through Modbus TCP

Power supply: 10 to 36 VDC

Power consumption: 76 mA at 24V (Max.160 mA at 12V)

Inputs: 6 Digital and 2 Analog

Analog Signals: 0-5 V, 0-10 V, 0-20 mA, 4-20 mA

Resolution:

Analog signals: 15 bits

Digital input:

Logical levels:
- Logical Level “0”: 0 to 0.5 VDC
- Logical Level “1”: 3 to 30 VDC
Maximum voltage: 30 VDC
Input impedance: 270 kΩ
Input current at typical 30 VDC: 150 µA
Maximum frequency:
- Dry Contact: 10 Hz
- PNP: 3 kHz
- NPN: 3 kHz
Minimum pulse duration:
- Dry Contact: 50 ms
- PNP: 150 µs
- NPN: 150 µs

Communication Interface:

USB 2.0 Interface;
Ethernet Interface (10/100 Mbps) with RJ45 connector;
RS485 communication interface with ModbusRTU protocol in Gateway mode

LEDS:

1 x Status LED;
1 x Local Network Connection LED;
1 x Broker MQTT Connection LED.

Software and application:

NXperience

Operating temperature:

Using the included batteries: -20 to 60 °C

Protection index: IP40

Enclosure: ABS + PC

Dimension: 129mm x 142 mm x 38 mm

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Download Warranty Form

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

The product returned will attract a 20% restocking fee.
The customer must pay the delivery costs.
Non standard, custom made or a specially manufactured or imported products are not returnable.
Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.