DM805-AI Analog Input Stepper Motor Driver

In stock (6 items available)
  • Weight
    0.3 kg
  • SKU
    SMC-015

The DM805-AI is a stepper motor driver with 0 to 5 VDC analog input for speed control. 18 to 80 VDC powered, with current up to 7.0 A peak.

Buy more for less:
Quantity ex GST incl GST Saving
1-4 items $149.09 / each N/A  
5-9 items $134.17 / each N/A save 10%
10 or more items $126.72 / each N/A save 15%
  • $149.09
Qty:  

The DM805-AI is a 0 to 5V input stepper drive with built-in oscillator which is based on the latest digital control algorithm. It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. Motor self-test and parameter auto-setup technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drivers in the markets. Its unique features make the DM805-AI an ideal solution for applications that require low-speed smoothness.

The three built-in potentiometers are used to preset and adjust the velocity, acceleration and deceleration. In 0-5V speed mode, the motor speed is controllable and follows the analog 0 to 5V input. In Low/HIGH speed mode, the motor speed is selected by digital input and adjusted by the high/low speed potentiometers. The user can run the motor with the least configuration and connection. In position mode, the DM805-AI is a traditional stepper drive. There is a 5V power supply output for customer use.

Features:

  • Anti-Resonance, provides optimum torque and nulls mid-range instability
  • Motor self-test and parameter auto-setup technology, offers optimum responses with different motors
  • Multi-Stepping allows a low resolution step input to produce a higher micro-step output for smooth system performance
  • Two preset velocity and adjust by built-in potentiometer
  • Preset acceleration/deceleration and adjust by built-in potentiometer
  • Velocity control mode via analog 0 to 5V and position control mode via pulse
  • Built-in pulse generator nulls external motion controller
  • Output current programmable, from 0.3 to 5.0A (RMS)
  • TTL compatible and optically isolated digital input
  • Automatic current reduction
  • Over-voltage, over-current, phase-error protection

Input voltage: 60 VDC (18 to 80VDC)

Phase input frequency: 0 to 200kHz

Logic signal current: 10mA (7 to 16mA)

Isolation resistance: 500Ω 

Analog input: 

  • 0 to 5V speed mode: 0 to 25±0.5 Rev/s (Dead band is 10mV)
  • External POT mode: 0 to 25±0.5 Rev/s (Dead band is 20mV)

Acceleration/deceleration/ramp potentiometer: 0.5 to 250±1 Rev/s² (0 to 25 turns)

LoSpeed potentiometer: 0 to 5±0.01 Rev/s (0 to 25 turns)

HiSpeed potentiometer: 0 to 25±0.5 Rev/s (0 to 25 turns)  

Operating environment:

  • Environment: Avoid dust, oil fog and corrosive gases
  • Ambient temperature: 0 to 50°C
  • Humidity: 40 to 90%RH
  • Operating temperature: 70°C (Max)
  • Vibration: 5.9m/s² Max

Storage temperature: -20 to 65°C

Weight: 350 g

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Customers who viewed this product bought

Drop items here to shop
Product has been added to your cart