Leadshine

Single shaft NEMA 34, 2 phase bipolar stepper motor with 4.5 N.m (46 kg·cm) of holding torque. Rated at 6 A phase current, weighing 2.4 kg with 80 mm body length and 12.7 mm shaft diameter.

DM442 fully digital microstepping stepper motor driver with anti-resonance tuning. Automatic or computer-driven tuning. 20 to 40 VDC powered with output current up to 4.2 A peak.

DE-9 to RJ12 Programming cable to suit our Leadshine stepper and servo motor drives.

Cable-PC-1 DE-9 to 4 pin programming cable. 1.2-meter (3.9-foot) RS232 cable for tuning the EM402, DM422, DM422C, DCS303 and ACS306 drives with ProTuner. 

Power and Encoder Cables for AC Servo Motor 5 metres long

Power and Encoder Cables for AC Servo Motor 10 meters long

3.0 N·m (426 Oz·In) 2 Phase NEMA 24 hybrid stepper motor with 1,000 line encoder for feedback.

Last units. This unit is reaching End of Life.

4.0 N·m (566 Oz·In) 2 phase NEMA 34 hybrid stepper motor with 1,000 line encoder for feedback.

Last units. This unit is reaching End of Life.

Cable carries power from and Easy Servo Motor (ES-M series) to an Easy Servo Driver (ES-D series).

Cable carries power from and Easy Servo Motor (ES-M series) to an Easy Servo Driver (ES-D series).

Cable carries power from and Easy Servo Motor (ES-M series) to an Easy Servo Driver (ES-D series).

DE-15F to DE-15M encoder extension cable for three phase (smaller) Easy Servo motors using the SMC-180 ES-D508 drive and our 180 W brush-less servo motor.

DE-15F to DE-15M encoder extension cable for three phase (smaller) Easy Servo motors using the SMC-180 ES-D508 drive.

DE-15F to DE-15M encoder extension cable for three phase (smaller) Easy Servo motors using the SMC-180 ES-D508 drive.

DE-15 to bare wire encoder extension cable to suit two phase Easy Servo motors using the SMC-182 ES-D808 or SMC-184 ES-D1008 drives.

DE-15 to bare wire encoder extension cable to suit two phase Easy Servo motors using the SMC-182 ES-D808 or SMC-184 ES-D1008 drives.

DE-15 to bare wire encoder extension cable to suit two phase Easy Servo motors using the SMC-182 ES-D808 or SMC-184 ES-D1008 drives.

DE-15 to bare wire encoder extension cable to suit two phase Easy Servo motors using the SMC-182 ES-D808 or SMC-184 ES-D1008 drives.

The DM805-AI is a stepper motor driver with 0 to 5 VDC analog input for speed control. 18 to 80 VDC powered, with current up to 7.0 A peak.

DM870 fully digital microstepping stepper motor driver with anti-resonance tuning. Automatic or computer-driven tuning. 24 to 72 VDC powered with output current up to 7.0 A peak.

The EM402 is an advanced stepper motor driver with features including electrical damping, anti-resonance, start-up smoothing, multi-stepping and sensorless stall detection. 20 to 48 VDC powered with output current up to 4.2 A peak.

The EM806 is an advanced stepper motor driver with features including electrical damping, anti-resonance, start-up smoothing, multi-stepping and sensor-less stall detection. 20 to 80 VDC powered with output current up to 8.2 A peak.

The SMC-033 is not recommended for new designs. Please consider the newer SMC-057

iES-2309 0.9 N·m NEMA 23 encoder-backed stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced DSP driver uses encoder feedback for servo-like operation.

NOT AVAILABLE FOR BACK ORDER

The EM402 is an advanced stepper motor driver with features including electrical damping, anti-resonance, start-up smoothing, multi-stepping and sensorless stall detection. 20 to 40 VDC powered with output current up to 2.2 A peak.