• New!

ToughSonic 12 - 3.7 Meter Ultrasonic Sensor (RS-485) 30mm Thread

In stock (2 items available)
  • Weight
    0.59 kg
  • SKU
    SNS-0150

Senix ToughSonic® 12 ultrasonic sensor TSPC-30S1K-485 measures level and distance through the air using ultrasonic sound waves up to a distance of 10 to 366cm (244cm is optimum). It features a 30mm IP68 Stainless Housing, Push-button and PC configurable


Buy more for less:
Quantity ex GST incl GST Saving
1-4 items $708.59 / each N/A  
5-9 items $637.73 / each N/A save 10%
10 or more items $602.30 / each N/A save 15%
  • $708.59
Qty:  

The ToughSonic 12 ultrasonic sensor has a maximum range of 12 feet (366 centimeters). This sensor was with a chemically resistant PVDF transducer front. 

Outputs include 4-20mA/0-10V Analog, two Sinking ("NPN") or Sourcing ("PNP") user selected switches and Modbus RTU RS-485 serial interface (allows addressable multi-sensor networks) 

The ToughSonic 12 has the same 30 millimeter stainless steel housing as the ToughSonic 14. It features a short 3 inch (7.6 centimeter) minimum range and a narrow ultrasonic beam width for measuring in tight spaces. And, like all ToughSonic sensors, it’s built for durability and ease of use in tough industrial environments. It’s fully submersible, corrosion resistant, shock resistant and all around tough. It’s also fully configurable with our SenixVIEW software or with our famous “Teach” feature for push button configuration.

  • 1.18 inch (30 millimeter) marine grade type 316 stainless steel housing.
  • Sealed epoxy potting for wet and dirty applications.
  • Ruggedized piezoelectric ultrasonic transducer, potted in place.
  • Hardened ToughSonic internal electronics.
  • UV resistant, potted-in cable.
  • Short and overload protected input / output.
  • Free SenixVIEW PC configuration and analysis software controlling more than 60 performance parameters, and dozens of viewing, analysis and maintenance options.
  • Push-button “Teach” feature.
  • Multi-sensor network capable.
  • Up to three simultaneous, industry standard outputs
  • Voltage Output: 0-10, 0-5 VDC or SenixVIEW customized; 10 mA max
  • Current Loop: 4-20 mA or SenixVIEW customized, current sourcing, max. loop 450ohm, teachable endpoints
  • Sinking Switch: 150 mA max. @ 40 VDC max., teachable set point & polarity, fault indication
  • Sourcing Switch: 150 mA max. @ input voltage, teachable set point & polarity, fault indication
  • Output Select: Defaults are voltage & current loop
  • RS-232, RS-485: Modbus protocol, 9600 to 115200 baud (selectable), 8 data bits, 1 stop, no parity
  • SYNC feature: Permits up to 32 sensors to operate in close proximity without interference
  • Maximum Range: 366 cm
  • Optimum Range: 244 centimeters (96 inches )
  • Temperature: -40° to 70° C
  • Humidity: 0 to 100% operating
  • Protection: NEMA-4X, NEMA-6P, IP68
  • Transducer: Ruggedized piezoelectric
  • Compensation: Temperature compensated
  • Resolution: Digital: 0.0034 inches (0.086 millimeters); Analog:4099 steps (0-10 VDC), 3279 steps (4-20 mA)
  • Repeatability: Nominal 0.2% of range @ constant temp. Affected by target, distance, environment
  • Update Rate: 20 Hz (50 ms), SenixVIEW adjustable; also affected by SenixVIEW filter selections

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Drop items here to shop
Product has been added to your cart