ToughSonic 50 - 15.2 Meter Ultrasonic Sensor (RS-485) with PVC Housing

ToughSonic 50 - 15.2 Meter Ultrasonic Sensor (RS-485) with PVC Housing

SKU: SNS-037

Senix ToughSonic® 50 ultrasonic sensor TSPC-25P-485 measures level and distance through the air using ultrasonic sound waves up to a distance of 15.2 metres or 50 feet. Standard housing and RS-485 output. With PVC Housing.

Senix
  • Manufacturer: Senix
Buy more for less:
1-4items$1021.23/ each 
5-9items$919.11/ eachsave10%
10or more items$868.05/ eachsave15%
  • $1021.23
Qty:  
Available for backorder

The ToughSonic 50 ultrasonic sensor has a maximum range of 15.2 meters. Like all ToughSonic sensors, it’s built for durability and ease of use in tough industrial environments. It’s fully submersible, corrosion resistant, shock resistant ultrasonic sensors are housed in 316 stainless steel and all around tough. It’s also fully configurable with our SenixVIEW software. ToughSonic 50s include our famous “Teach†feature for push button configuration. This compact sensor is used around the world on remote liquid level systems, heavy equipment, factory automation applications and more. This is Senix's most popular sensor.

ToughSonic 50s are available in three different housings, each with a RS-485 serial interfaces (RS-232 optional). These 9-wire sensors allow up to six simultaneous serial, analog and/or switch outputs. These workhorse sensors are used around the world in remote liquid level applications and harsh factory environment The sensor is equipped with 2 m of cable but other lengths can be ordered as an optional extra. A plastic bracket is included with each sensor

  • Standard - Our Standard Model (TSPC-21S) comes in a 2.1 inch (53.34 millimeter) smooth 316 stainless steel housing for easy clamping. ultrasonic sensor ToughSonic 50 Rear Mount Rear Mount
  • The Rear Mount Model (TSPC-21SRM) adds a stainless steel end cap with 1.5 inch NPT threading to the 2.1 inch smooth standard housing. Ultrasonic sensor ToughSonic 50 PVC
  • PVC Model. The 2.5 inch PVC Model of the ToughSonic 50 (TSPC-25P) is also available. This model has the same solid state electronics, ruggedized piezoelectric transducer, permanently attached, 9-wire cable and full epoxy potting of the other ToughSonic 50s, but packaged in a 2.5 inch PVC housing with 2.5 inch NPT threading on either end for tank level applications.
  • Type 316 stainless steel housing (except PVC model).
  • Sealed epoxy potting for wet and dirty applications.
  • Ruggedized piezoelectric ultrasonic transducer, potted in place.
  • Hardened ToughSonic solid state internal electronics.
  • UV resistant, potted-in, 9-wire cable.
  • Short and overload protected input / output.
  • Free SenixVIEW PC configuration and analysis software controlling more than 60 performance parameters, and dozens of viewing, analysis and maintenance options.
  • Multi-sensor network capable.
  • Up to six simultaneous, industry standard outputs
  • Voltage Output: 0-10, 0-5 VDC or SenixVIEW customized; 10 mA max
  • Current Loop1: Current sourcing 4-20 mA or SenixVIEW adjustable, max. loop 450?
  • Current Loop2: Current sinking 4-20 mA or SenixVIEW adjustable, max. loop 450?
  • Sinking Switch: 150 mA max. @ 40 VDC max., teachable set point & polarity, fault indication
  • Sourcing Switch: 150 mA max. @ input voltage, teachable set point & polarity, fault indication
  • RS-232, RS-485: Modbus protocol, 9600 to 115200 baud (selectable), 8 data bits, 1 stop, no parity
  • SYNC feature: Permits up to 32 sensors to operate in close proximity without interference
  • Maximum Range: 15.2 m
  • Optimum Range: 30.5 cm- 10 m
  • Temperature: -40° to 70° C
  • Humidity: 0 to 100% operating
  • Protection: NEMA-4X, NEMA-6P, IP68
  • Transducer: Ruggedized piezoelectric
  • Compensation: Temperature compensated
  • Resolution: Digital: 0.3438 millimeters; Analog:4099 steps (0-10 VDC), 3279 steps (4-20 mA)
  • Repeatability: Nominal 0.2% of range @ constant temp. Affected by target, distance, environment
  • Update Rate: 5 Hz (200 ms), SenixVIEW adjustable; also affected by SenixVIEW filter selections

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products