Sale

TA4 Isolated Transmitter with 0-36VDC Input and 4-20mA Output. The output can be programmed to span over a input voltage range less than 0-36VDC.  It comes with a 4 digit programmable display and alarm indicators. 22 to 50VDC powered

125 kHz RFID Iso Card.

Key Fob for Teracom RFID controllers.

TxMiniBlock is a cost-effective programmable RTD temperature transmitter for head mounting. With a unique microprocessor based technology it features full PC configuration of range and calibration. 4-20mA loop powered

NOT AVAILABLE FOR BACKORDER

DC Tubular Proximity Switch Normally Closed PNP Output TS-1805PA
SALE ITEM - 3 MONTHS WARRANTY

The Conch TS-1204PB tubular inductive proximity switch senses metals within 4 mm. The indicator in the rear of the sensor lights up when triggered. The body is 12 mm in diameter. The output is normally closed.
SALE ITEM - 3 MONTHS WARRANTY

Senix ToughSonic® 12 ultrasonic sensor TSPC-N1S1K-485 measures level and distance through the air using ultrasonic sound waves up to a distance of 10 to 366cm (244cm is optimum). It features a 1" NPT thread for Tank monitoring, IP68 Stainless Housing, Push-button and PC configurable

Senix ToughSonic® 12 ultrasonic sensor TSPC-30S1K-485 measures level and distance through the air using ultrasonic sound waves up to a distance of 10 to 366cm (244cm is optimum). It features a 30mm IP68 Stainless Housing, Push-button and PC configurable

Last Unit!!

DC Tubular Proximity Switch PNP Output TS-3015PA
SALE ITEM - 3 MONTHS WARRANTY

DC Tubular Proximity Switch NPN Output TS-3015NA
SALE ITEM - 3 MONTHS WARRANTY

DC Tubular Proximity Switch PNP Output TS-3010PA. 
SALE ITEM - 3 MONTHS WARRANTY

DC Tubular Proximity Switch NPN Output TS-3010NA. 
SALE ITEM - 3 MONTHS WARRANTY

The TH500A by Hanyoung Nux is a sophisticated temperature/humidity controller. It is capable of fully programmable PID control, pattern/delay recognition and detailed logging. 

Designed to be paired with the HNC-061 as a datalogger for USB flash drives.

These double channel surge arresters are designed to protect all DC “floating” analogue signal lines both voltage and mA, including TTL levels and PT100 signals.

LAST UNITS!!
No Backorders available.

SMH-TC 12VDC Signal Line Surge Arrester. Suitable for 0-10 V signals.

LAST UNITS!!
No Backorders available.

RCD-BAC-LCD sensors are designed to detect carbon dioxide concentration and temperature in the room spaces and have BACnet MS/TP communications with a LCD screen

NOT AVAILABLE FOR BACKORDER

Novus Automation's NP620 Programmable Range pressure sensor with input range of 0 to 60 Bar. 2-wire 4 to 20 mA output, 0.25% accuracy and 1/2" BSPP process connection.

NOT AVAILABLE FOR BACKORDER

Novus Automation's NP620 Programmable Range pressure sensor with input range of 0 to 25 Bar. 2-wire 4 to 20 mA output, 0.25% accuracy and 1/2" BSPP process connection.

NOT AVAILABLE FOR BACKORDER

Temperature and humidity sensor for high pressure or vacuum systems consists of wall mount transmitter and sensor with ½" NPT thread. With LCD display and RS485 Modbus RTU connectivity

NOT AVAILABLE FOR BACKORDER

DS18B20 Temperature Sensor with copper screw clip probe and a 3 metre cable. Connector is an option

LLR-MOD sensors have been designed to measure Light Level (LUX) in the room spaces. The LLR sensors also monitor for occupancy via infra-red detection.

NOT AVAILABLE FOR BACKORDER

CDR-AL-LCD sensors and alarm units are designed to detect carbon dioxide concentration, temperature in the room spaces and provide alarm indication on high level of CO2 (green, amber and red LED).

NOT AVAILABLE FOR BACKORDER

CDRC sensors are designed to detect carbon dioxide concentration and relative humidity and temperature in the room spaces and have 4 to 20 mA outputs

NOT AVAILABLE FOR BACKORDER

CDRC sensors are designed to detect carbon dioxide concentration and temperature in the room spaces and have 4 to 20 mA outputs

NOT AVAILABLE FOR BACKORDER