CG-DOCK Rack with 8 slots for ClickNGo micromodules. Used with Novus N20K48 controllers.

The BRT LB03  Pocket Precision 0-20mA 4-20mA 0-10V 24V Signal Generator Current Voltage Signal Measuring Meter 

The PRO1 series is a range of 1 module, single phase Smart Energy Meters consisting of 4 different types, each with their specific characteristics. They have an exceptional combination of a high accuracy class (1/B) and a broad temperature range from -25°C to +45°C. Another unique feature is the Imax of 45 A.

MOD-PULSE12 meter pulse counter modules are designed to count pulses from meters such as energy, gas, water and heat meters. Twelve 32bit counters. Outputs Modbus RTU over RS-485.

The BRT LB02  Process Calibrator Resistance RTD TC mA mV signal generator is widely used as a precision multifunction process calibrator and multimeter, temperature calibrator, RTD PT100 simulator, loop calibrator, etc. 

BRT LB02A Multifunction Process calibrator can be used as a mV mA frequency process calibrator and digital multimeter to output and measure 0-20mA, 0-10V, 0-5V, 24V, voltage current signal, type K, J, B, S, T, N, thermocouple signal, PT1000, PT100, CU500 RTD signal, 0-10KHz frequency signal, resistance signal output, curves signal output, etc.

Dual shaft NEMA 34 frame size bipolar stepper motor with 46 kg·cm holding torque.

Replacement lens for models RG-9, RG-11, and RG-15

UC300 series is an IoT controller used for remote control and data acquisition from diverse devices. It contains multiple I/O interfaces
including analog input, digital input, relay output, serial port, and PT100RTD input. It supports remote device data transmission via4G or LoRaWAN networks.

EZM-9930 Single SET Programmable Counter with 6 Digit Displays for PV and SP, Relay Output, 24VAC power and 96x96mm Front Panel

TT-210 is a non isolated 4-20mA hockey puck head mounted Temperature transmitter. It accepts all kinds of thermocouple and PT100 RTD inputs and coverts them into an analog 4-20mA signal. This head mount temperature transmitter is a two wire loop powered transmitter

TT-500 is a non isolated 0-10VDC hockey puck head mounted Temperature transmitter. It accepts all kinds of thermocouple and PT100 RTD inputs and coverts them into an analog 0-10VDC signal. 

TT-216 is a galvanically isolated 4-20mA hockey puck head mounted Temperature transmitter. It accepts all kinds of thermocouple and PT100 RTD inputs and coverts them into an analog 4-20mA signal. This head mount temperature transmitter is a two wire loop powered transmitter

TT-311 is a galvanically isolated 4-20mA DIN Rail mounted Temperature transmitter. It accepts all kinds of thermocouple and PT100 RTD inputs and coverts them into an analog 4-20mA signal. 

J-type thermocouple in a stainless steel tube and 1/4" BSP thread with 2 meter glass fibre sheathed cable good for 0 to 400 ºC

J-type thermocouple in a stainless steel tube and 1/4" BSP thread with 2 meter stainless steel sheathed cable good for 0 to 400 ºC

TSH230 is a waterproof temperature and humidity sensor with a 1-Wire interface. Suitable for use with Teracom controllers. -20 to 60 °C range with ±0.4 °C accuracy from -10 to 60 °C.

TSH330 is a waterproof temperature and humidity sensor with a Modbus RTU interface. Suitable for use with Teracom controllers and PLC's. -20 to 60 °C range with ±0.4 °C accuracy from -10 to 60 °C.

High-Temperature Type pressure sensor with an input range of 0 to 6 Bar. 2-wire 4 to 20 mA output. 1/4" PT (Japanese thread type same as BSP - British thread type) process connection.

High-Temperature Type pressure sensor with an input range of 0 to 10 Bar. 2-wire 4 to 20 mA output. 1/4" PT (Japanese thread type same as BSP - British thread type) process connection.

High-Temperature Type pressure sensor with an input range of 0 to 25 Bar. 2-wire 4 to 20 mA output. 1/4" PT (Japanese thread type same as BSP - British thread type) process connection.

Head mount signal conditioner takes thermocouples, Pt100 sensors, and outputs 4 to 20 mA. Programmable zero and span via keypad. Loop powered.

No available for backorder

Rika RK95-51 Mouting Bracket for PH, EC, DO, OR Sensors