Leadshine Gear Box 10:1 for NEMA 34 (86mm) stepper motor with 14mm shaft dia

8.5 N·m, 2 Phase NEMA 34 closed loop stepper motor with 1,000 line encoder for feedback. Rated at 6.0 A phase current, weighing 4.0 kg with 147 mm body length and 14.0 mm shaft diameter. IP65 rating

The Proop 7 Lite is a budget priced 7" Touchscreen with a resolution 800 x 480 pixels and 260K colors; RS-232 and RS-485 communication

Multifunctional Programmable Timer and Counter with RS 232/485 Serial Communication Unit. Can configure it to be a Counter, Totalizer Counter, Batch Counter, Timer, Chronometer, Frequencymeter and Tachometer. Modbus RTU communications. 

K-type thermocouple in a stainless steel tube and 1/4" NPT thread with glass fibre sheathed cable good for 0 to 400 ºC
316 (1.4401) STAINLESS STEEL

LMR240 Low Loss coaxial cable with SMA Male to SMA Female Connector

50 mm probe Pt100 RTD sensor with standard head. 3 wire connection.

Photo Electric Switch PR-T10N, 18mm Dia, Through Beam Type, 10m Range, NPN Output

Photo Electric Switch PR-T10P, 18mm Dia, Through Beam Type, 10m Range, PNP Output

Unshielded cylindrical shaped 8 mm in diameter 2 wire inductive proximity sensor with NC style output and 2 meter cable.

iCS-2331-L from Leadshine is a 3.1 N·m NEMA 23 closed loop stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced anti-resonance DSP driver.

iCS-2323 from Leadshine is a 2.3 N·m NEMA 23 closed loop stepper motor with integrated driver. Standard pulse and direction (or CW/CCW) input. Advanced anti-resonance DSP driver.

iCS-RS Series is an integrated stepper motor with drive, and based on standard Modbus RTU protocol. Using RS485 communication it can network up to 31 axes. Its built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applications, to greatly enhance system reliability and reduce the cost

DC4 is an Isolated Transmitter with 0-20mA Input and four isolated 0-20mA Outputs. 20 to 28VDC powered

ACT210-P is an electronic device designed to control access to facilities, elevators, machines, automobiles, forklifts, etc. The product supports EM4102 compatible 125kHz RFID tags and can be easily installed on a panel due to its cylindrical construction. 

PEN Series photo sensor Retro-Reflective type with relay contact output. Operates over a distance of up to 5 metres and is 24 to 240 VDC/AC powered.

The 3DM2283 stepper drive adopts advanced features like electrical damping, anti-resonance, start-up smoothing, multi-stepping. With the input voltage of 90 - 230 VAC / 115 - 325 VDC and output current of 2.10 - 11.7 A, it is capable of driving a wide range of 3-phase stepper motors with high precision at extra smoothness, quietness, and very low motor heating.

The Leadshine iSV2-RS8075V48 is an integrated servo motor with a 80mm frame size low-voltage servomotor integrated with a 17bit encoder and a servo drive, Can be controlled by Modbus RTU and pulse control

RK300-02 Outdoor Dust Sensor using laser scattering principle to detect the existence of dust particle concentration in the air. Can detect 1.0μm particles with good consistency and stability. 

This model detects atmospheric particulate matter (PM) that have a diameter of less than 2.5 micrometers and 10 micrometers (PM2.5 and PM10 combined).

PM10 (particles with a diameter of 10 micrometres or less): these particles are small enough to pass through the throat and nose and enter the lungs 

Full model:  RK300-02-D-B-B-A-2000

Easy to mount the ITP16 fits into a standard 22.5 mm borehole for signal lamps and can be connected to various RTDs (Pt100, Pt1000, and others) or thermocouples (K, J, and others) . There is NPN output for control or alarm function.

PEN Series photo sensor through-beam type with relay contact output. Operates over a distance of up to 10 metres and is 24 to 240 VDC/AC powered.

1-meter RS485 cable for Modbus RTU communication with iSV2 and iCS Integrated Motor options

Milesight EM300-TH is LoRaWAN-based temperature and humidity sensor. EM300-TH can be widely used for both indoor and outdoor application such as offices, greenhouses, etc