LJTick-Resistance 1K
The LJTick-Resistance (LJT-Rx) makes it easy for LabJack devices to measure resistive sensors.
A 4-pin signal conditioning module intended to plug into the standard AIN/AIN/GND/VS screw terminal block found on newer LabJack data acquisition modules such as U3, U6, UE9 and T7. The LJTick-Resistance (LJTRx) makes it easy for LabJack devices to measure resistive sensors. This tick gives users a regulated 2.5V signal that can be used as a excitation voltage and a known resistance value in series with a sensor input line. This gives users the ability to calculate the resistance of their connected sensor. Uses precision 1k resistor in a resistor divider setup. The most common application is measuring resistive sensors like RTDs.
- Vref: A 2.5 volt reference voltage output. Internally this reference is used for level shifting, but very little current is used, leaving substantial current available to the user if a very accurate 2.5 volt reference is needed. The resistor Rx to be measured is connected between Vref and VINA or VINB.
- GND: Same as LabJack ground (GND).
- VINA/VINB: These are the LJTick-Resistance input terminals.
- VOUT = 2.5 * 1K/(1K+Rx)
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.