LabJack

The LabJack U12 is the simplest member of the family, with 12 analog inputs (12 bit ±10 VDC, programmable gain amplifier), 20 digital IO, 2 voltage outputs and USB interface.

Screw terminal connections, with short-circuit and overvoltage protection, for the extra 16 digital I/O on the LabJack U12.

High-level linear voltage output and high accuracy. Operating temperature range from 0 to +150 °C.

The most economical member of the LabJack family, the U3-LV has 16 flexible I/O (digital input, digital output, 12 bit 0 to 3.6 VDC analog input), 2 voltage outputs and USB interface.

The most economical member of the LabJack family, the U3-HV has 12 flexible I/O (digital input, digital output, 12 bit 0 to 3.6 VDC analog input), 4 HV analog inputs (12 bit -10 to 20 VDC), 2 voltage outputs and USB interface.

Provides convenient screw terminal access to 12 digital I/O available on a DB15 connector.

A signal conditioning module that divides 2 single-ended uni-polar channels of 0 to 10 V analog signals down to 0 to 2.5 V signals. V_output = V_input/4 

Plugs directly into the standard screw terminal block found on newer U3/U6/UE9/T4/T7. On board switch allows 5 various gain settings, one of them being custom.

Allows 2 digital I/O lines on a U3, U6 and UE9 to each control a relay or other moderate load. Each has a switch to ground (i.e open-collector) that can hold off up to 50 V and can sink up to 200 mA.

8×8 grid of holes for prototyping custom signal-conditioning ticks.

A signal conditioning module designed to convert two 4 to 20 mA current loop signals into voltage signals that vary from 0.472 to 2.360 V.

LJTick-DAC is an analog output expansion module that provides a pair of 14-bit analog outputs with a range of ±10 V.

Plugs directly into the bottom of a LabJack U6, UE9 or T7 to give screw terminal access to extra IO signals.

LabJack U6 USB IO module with 14 analog inputs (up to 16 bit resolution), 2 analog outputs and 20 digital IO.

LabJack U6-Pro USB IO module with 14 analog inputs (up to 22 bit resolution), 2 analog outputs and 20 digital IO.

LJTick module that will convert two ±10 V signals to 0 to 2.5 V signals for LabJack U3, U6, UE9, T4 and T7

12 channel, semiconductor switch output module designed for Labjack U3, U6, UE9, T4 and t7 data acquisition modules. 750 mA per channel at 5 to 28 VDC.

80 channel analog multiplexor for U6, UE9 and T7 Labjack data acquisition modules.

Short, 37 pin cable suits the expansion plug on the LabJack U6, U6-Pro, UE9 and UE9-Pro.

OEM version of the Labjack U3-LV. Most through-hole components are not installed, making the U3-OEM very flexible.

OEM version of the Labjack U3-HV. Most through-hole components (USB and DB15 connector, screw terminals etc) are not installed, making the U3-OEM very flexible. See the U3 User's Guide for more information. Ships with the board only. All documentation, drivers, and examples are available online. DAQFactory Express is not included.

LABJACK T7 Multifunction DAQ with Ethernet and USB

T7 Pro has all the features of the multi-function DAQ T7 (Ethernet & USB interface, 100 kS/s) plus Wi-Fi & 24-bit ADC.

Plugs directly into the bottom of a LabJack - U12 via the DB25 connector. The card doesn't come with relays loaded, it is a bare PCB that will accept either 16 miniature style relays or 8 standard size relays.